Well this is pretty darn awesome! Any plans to release the source or a compiled binary for us to play with? I would love to have this ability as I'm sure many others would! Good work Mike! 73 Stephen K1LNX On Wed, Feb 10, 2016 at 10:43 AM, Mike Zingman <mike.zingman@gmail.com> wrote:
Since this is an ASL list, this is off topic, but may interest some members. So here goes.
Yesterday I decided to try a simple experiment and it worked better than I had expected. I conducted my first QSO on DMR without any RF hardware at all. Basically just like the DVDongle/ThumbDV for DStar is used (WinDV or DummyRepeater). It looks like:
Mic/Speaker on PC <---> DMRGateway <---> DMRlink <--- BM or SANDBOX
DMRGateway talks directly with the ThumbDV to both encode and decode the AMBE data. The audio and data paths look like:
TX - Mic audio is pulled from the sound card as 8KHZ PCM and feeds the encoder. PTT is controlled by either VOX or a keyboard toggle. The AMBE is then encapsulated in IPSC frames and passed on to DMRlink to send to the network.
RX - DMRlink sends us AMBE frames. AMBE audio is decoded by the ThumbDV and the 8KHZ PCM is sent to the sound hardware.
This is the same as the ASL solution with USRP except that there is no ASL and no USRP ;-)
And it works! The sound is clean.
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital