David, I have the new INADVM REV2 made by Kevin Custer W3KKC. I have tried to tune it several times using this website. https://www.f5uii.net/en/installation-calibration-adjustment-tunning-mmdvm-m... Thanks for the links! I am going to read thru them a give it a try. Michael KD5DFB On Sat, May 27, 2017 at 11:25 AM, David KE6UPI <dshaw@ke6upi.com> wrote:
Hello Michael, Have you tuned the ZUM board?
https://github.com/N4IRS/MMDVM-Install/wiki/MMDVM-Calibration
https://github.com/N4IRS/MMDVM-Install/wiki/pos-centre-threshold
Most users tune the Tx first then Rx.
As for the VXR-7000 I can't speak if it will work or not..
David KE6UPI
On Fri, May 26, 2017 at 10:29 PM, Michael Hebert <mhebert1975@gmail.com> wrote:
Group,
I know this might be a little off subject. I have tried the MMDVM Yahoo group with no luck.
Has anyone interface a Vertex VXR-7000 repeater to a MMDVM setup. I can't get DMR to work. The portable radio will key up 3 times then emit the long tone like the repeater is not there.
Any help would be greatly appreciated!
Michael KD5DFB
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital