OK, I realize that I'm a little late coming to the party here...but, is there a BOM (bill of materials) aside from a DMR repeater and a working allstar (been doing it for 6 years...so, I think I can spin up another node...) node? Reason I'm asking is that I've come into the ability to get onto a 500' tower that already has a 440 stick near the top. Now, I'll have to get a 5.8 gig link back to my central net access point (about 8 air miles...Ubnt equipment is your friend), but, also have a moto UHF DMR repeater sitting in a box ready to go, and my local coord body is going to hunt for a pair on narrowband spacing to assign to me. So, assuming I have the repeater (and amp), duplexer, Pi2B, net connection...I think I'll need some dongle (AMBE?) to do the transcoding, another channel driver for allstar...a legit node number (though, I don't see this ever showing up on DMR-MARC like my other machine in Fairless Hills); I only plan on using this as a DMR link into my existing allstar network...) Thinking that the Pi uses the DIAL release? Or is Compton's version workable? saw something about a different channel driver...so, that's on the list to acquire and gen into the system (haven't looked to see if it is part of the distro). Am I missing something? I'll offer to collect FAQ information and re-post as need be (I know what it's like cranking on code and then facing doing the dox...) if that would be a help. And if I'm off base, I'm ok with that and will go back to lurking... 73 all Bryan WB0YLE