Mike, In your rxchannel stanza, is 192.168.1.182:34001:32001 the IP address of your RPi? is 34001 and 32001 the tx and rx ports going to the DV3000 dongle? Also, I notice when I run help in asterisk, usrp show is there. Here is what mine shows. 192.168.1.182:34001 txkey no rxkey 0 read 0 write 0 Waiting on DV3000 to show up. Last, in the rpt.conf is that the minimum or the only statements you need? Michael KD5DFB On Fri, Dec 11, 2015 at 12:03 PM, Mike Zingman <mike.zingman@gmail.com> wrote:
1) in /etc/asterisk/modules.conf enable usrp as
load => chan_usrp.so
2) in rpt.conf create a stanza like:
[1999]
rxchannel = usrp/192.168.1.182:34001:32001
duplex = 2
scheduler=scheduler
functions = functions-repeater
hangtime=0
authlevel = 0
Where the address and ports are configured to your network.
3) in rpt.conf add your node
[nodes]
1999 = radio@127.0.0.1:4570/1999,NONE
Now chan_usrp is ready to go.
On Fri, Dec 11, 2015 at 12:56 PM, David KE6UPI <dshaw@ke6upi.com> wrote:
Hello Robert, If you find out how to configure the Chan_USRP and asterisk please let me know.
David
On Fri, Dec 11, 2015 at 9:28 AM, Robert Newberry <N1XBM@amsat.org> wrote:
Is the "readme.md" the documentation I should be reading for setting up DMRlink?
I've also been scanning dmrlink_SAMPLE.cfg for how to setup a parrot tg.
Thank you
N1XBM Apparare Scientor Paratus Communicare Allstar Node # 27086, 41540, 41812, 42086, 42658
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital
_______________________________________________ Allstar-Digital mailing list Allstar-Digital@lists.keekles.org http://lists.keekles.org/cgi-bin/mailman/listinfo/allstar-digital