In your rpt.conf file do you have all the local nodes on the same box listed in the Nodes stanza? And do you have all the nodes set up to send stat updates to the Allstar system? there should be one line for each node on the box. Did you uncomment these lines in the rpt conf file? Also check to see if there is the get status line uncommented out so the box gets the updates from the Allstar server. there should only be one of these uncommented for the entire box. Jon VA3RQ On 5/29/2012 12:55 AM, Bob Roszkowski wrote:
I currently have a server with a node setup as a Hub (28054). I tried to add a couple more node numbers to the server for future RTCM boxes. The new node numbers are setup with a HUB (no radio) node type / no radio interface. I am having a problem. If I try to connect the added node numbers to the hub node, it fails. If I connect to any other node outside this server, it connects fine. I have made all the possible changes to the config files. I even went as far as using the online system to create new config files. Both have the same result. Been racking my brain out on this one for a couple days. I just get a 'rpt/connection_failed' .
thanx
boB - W5EVH
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users