looks to me like maybe Zaptel isnt running JIM
Date: Fri, 7 Oct 2011 01:29:32 +1000 From: vk4akp@yahoo.com.au To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] Asterisk service stopping minutes after boot constantly.. Help?
Hi,
Last few days I have had a problem with Asterisk stopping for no reason.
Asterisk service stops a couple of minutes after boot for no reason.
Every time I reboot or restart Asterisk I get the same thing. Asterisk runs for a couple of minutes and then drops out.
Nothing has been changed on the system in weeks.
Any idea's?
Tail of the log is included below.
~Ken - vk4akp~ .-.-.
[Oct 7 00:29:41] NOTICE[7624] pbx_ael.c: Starting AEL load process. [Oct 7 00:29:41] NOTICE[7624] pbx_ael.c: AEL load process: calculated config file name '/etc/asterisk/extensions.ael'. [Oct 7 00:29:41] NOTICE[7624] pbx_ael.c: AEL load process: parsed config file name '/etc/asterisk/extensions.ael'. [Oct 7 00:29:41] NOTICE[7624] pbx_ael.c: AEL load process: checked config file name '/etc/asterisk/extensions.ael'. [Oct 7 00:29:41] NOTICE[7624] pbx_ael.c: AEL load process: compiled config file name '/etc/asterisk/extensions.ael'. [Oct 7 00:29:41] NOTICE[7624] pbx_ael.c: AEL load process: merged config file name '/etc/asterisk/extensions.ael'. [Oct 7 00:29:41] NOTICE[7624] pbx_ael.c: AEL load process: verified config file name '/etc/asterisk/extensions.ael'. [Oct 7 00:29:41] ERROR[7624] codec_dahdi.c: Failed to open /dev/zap/transcode: No such file or directory [Oct 7 00:29:41] NOTICE[7624] chan_irlp.c: Unable to load config irlp.conf [Oct 7 00:29:42] NOTICE[7624] app_gps.c: Unable to load config gps.conf [Oct 7 00:29:42] NOTICE[7665] app_rpt.c: Normal Repeater Init 2134 [Oct 7 00:29:42] NOTICE[7665] app_rpt.c: Normal Repeater Init 20040 [Oct 7 00:29:42] WARNING[7668] chan_usbradio.c: Loaded parameters from usbradio_tune_usb.conf for device usb . [Oct 7 00:29:42] WARNING[7672] chan_usbradio.c: Loaded parameters from usbradio_tune_usb1.conf for device usb1 .
--
On 10/7/2011 12:38 AM, app_rpt-users-request@ohnosec.org wrote:
Send App_rpt-users mailing list submissions to app_rpt-users@ohnosec.org
To subscribe or unsubscribe via the World Wide Web, visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request@ohnosec.org
You can reach the person managing the list at app_rpt-users-owner@ohnosec.org
When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..."
Today's Topics:
1. for those Limey Linux and or D525MW users who are brave enough (Jim Duuuude) 2. Re: for those Limey Linux and or D525MW users who are brave enough (Jim Duuuude) 3. Re: for those Limey Linux and or D525MW users who are brave enough (Ramesh Dhami (VA3UV)) 4. Re: for those Limey Linux and or D525MW users who are brave enough (Jon Rorke) 5. Re: for those Limey Linux and or D525MW users who are brave enough (Jim Duuuude)
----------------------------------------------------------------------
Message: 1 Date: Thu, 6 Oct 2011 06:46:45 -0700 From: Jim Duuuude<telesistant@hotmail.com> To: app_rpt mailing list<app_rpt-users@ohnosec.org> Subject: [App_rpt-users] for those Limey Linux and or D525MW users who are brave enough Message-ID:<BLU155-W1720983FA3876AD1B9AAEAB1F90@phx.gbl> Content-Type: text/plain; charset="iso-8859-1"
I have compiled a test version of Limey Linux version 1.1.5 that appears to properly support the new Intel D525MW Atom motherboard.
This is an 'augmented' version of the i686-suported-1.1.5 release, so it *should* work on all the previously-supported i686 processors, also.
There were some rather major changes (necessary to support SATA interfaces) in the hard disk driver stuff (even for those MB's that only have IDE), so it would be nice if some people could verify that this still works on non-D525MW motherboards (at least the ones that work in the normal release).
I have tested this release on both a D525MW and the D945GCLF series motherboards, and it seems to work just fine.
Also, if you have 5 minutes to wait for it to boot (since the SWINE boot loader does not support anything faster then USB 1.1 speed, YUCH!), you can flash the distro onto a USB pen drive (>= 128 MB), and it will work. Once the OS loads, it runs at full speed, just the initial boot load is PAINFULLY slow.
If you dare, here is the URL for this version:
http://stats.allstarlink.org/limeylinux/downloads/cfimg-D525MW-1.1.5.tar.gz
JIM WB6NIL