In /etc/asterisk/rpt.conf you will see this: telemdefault = 0 ; 0 = telemetry output off ; 1 = telemetry output on (default = 1) ; 2 = timed telemetry output on command execution and for a short time thereafter. Change it to telemdefault=2. That will announce in response to local commands and be silent otherwise. On Tue, Jan 29, 2019 at 4:25 PM George Csahanin <george@dyb.com> wrote:
Folks, is there a way to play link status announcements at the local node that made the interrogation or command? We have one node that makes many link status long requests and commands resulting in "already in this mode", and maybe a long string of node numbers. Even when I connect/disconnect it would be nice to not disrupt comms on other nodes.
So...is there a way to only hear this locally?
GeorgeC W2DB 2360, 28599
-- George Csahanin 10100 Carson Ranch Rd. Crowley, TX 76036 682-708-5710 office 401-338-0568 cel george@w2db.com
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Tim WD6AWP