I expect a Raspberry Pi or Arduino could easily do this with their built in ADC circuitry and a bit of external 'glue' :-) Steven Donegan KK6IVC General Class FCC License FAA PP-ASEL Pilots License Silver State Car #86 www.sscc.us From: David Shaw <shawpbx@gmail.com> To: Users of Asterisk app_rpt <app_rpt-users@lists.allstarlink.org> Sent: Friday, April 28, 2017 8:05 PM Subject: Re: [App_rpt-users] Is it possible to have voltage read back? Food for thought.. How about an old UPS. Wire it to your battery and use upsmon.. I would check to see if upsmon will write a text file first.. Look at using an Arduino. Then have ASL read it. David --Thanks, David "Laws that forbid the carrying of arms...disarm only those who are neither inclined nor determined to commit crimes. Such laws make things worse for the assaulted and better for the assailants; they serve rather to encourage than prevent homicides, for an unarmed man may be attacked with greater confidence than an armed one." Thomas Jefferson On Fri, Apr 28, 2017 at 3:05 PM, Loren Tedford <lorentedford@gmail.com> wrote: I was wondering if it was possible to have voltages read back on the repeater site.. Mainly 12 volt type scenario what type of equipment would i need to make this work with my current allstarlink system and how would it work?? I am running Dial on a PC with a pico power supply. Loren Tedford (KC9ZHV) Phone:Fax: 1-618-551-2755 Email: lorentedford@gmail.comEmail: KC9ZHV@KC9ZHV.comhttp://www.lorentedford.comhttp://www.kc9zhv.comhttp://forum.kc9zhv.comhttp:... ______________________________ _________________ App_rpt-users mailing list App_rpt-users@lists. allstarlink.org http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_ rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_ rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.