Mike thanks for the suggestions. The method of input is a cell phone app (Android-IAX) or (Zoiper) Phone audio codec is a VOIP negotiation between the phone and the asterisk IAX account at my nodes IP address. Currently there is no way to lower Mic input level at the phone its self. Since Allstar Nodes can have multiple input paths for audio.... Radio, IAX, etc. The differential between different source paths is where my problem lies. I do know there are ways to set different volume levels (conference inputs) but it appeared to be from different extensions inputs. I don't grasp if your setting can be added to the different context settings like [phone] and not affect [radio] or if they pertain to separate extension numbers I will do a bit of reading hopefully my feeble brain will grasp how to use your info. Many thanks Larry - N7FM On 04/27/2016 12:03 PM, mike@midnighteng.com wrote:
You might mention the method of the incoming IAX. Google Voice/voip trunk OR a direct connectio via bluetooth or a analog input from a cellphone.
But a direct answer...
exten => s,1,Set(VOLUME(TX)=4) exten => s,n,Set(VOLUME(RX)=4)
Check asterisk manual. You might need to make multiple settings as commands to allow for a wider array of differences.
I would get the exact source of the problem before making adjustments. Cellphone / carrier / incorrect audio levels in app_rpt Just because everything else seems normal does not mean it is correct and that always shows itself when introducing other sources.
Something to think about anyway.
...mike/kb8jnm
Can some one give me a hint of how to deal with incoming cell phone audio that overdrives remote Allstar IAX connections.
I have a couple friends that use their cell phone with (Android-IAX app) to connect to my nodes when no RF access is available. Incoming phone audio via IAX is way strong coming from that source. Yet other Asterisk/Allstar connections are just fine with the simple tune setting used.
Being fairly new to the cell phone world (about 6 months) I still have no clue (and neither do they) as to how to manipulate mic volume on a cell phone or even if you can.
Anyone have any hints on how they handle this problem?
Larry - N7FM
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.