Well, how about *4XXXX*31999# (like if you wanted to execute *1999 on the linked node) Jim Date: Tue, 18 Sep 2012 10:14:18 -0600 From: jeff.carrier@rmsmsecurity.com To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] Remote command? Quick question, I’m playing with MDC1200 control due to all of the recent posts. I have that part working but here is my issue. I have 4 nodes, 3 of them are connected to radios and one of them is a hub node. The hub node is connected to the internet and is the connection point to the allstar and echolink network. The 3 nodes connected to the radios are on private wireless LAN. I’d “like” to be able to send a command on one of the RF nodes via either MDC1200 or DTMF to say disable incoming connections but that command has to be passed to the “hub” node. Is there a way to properly format a macro to accomplish this or am I stuck with doing *4XXXXX then sending the command? Thanks in advance 73 de K0JSC _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users