if I am not mistaken, you can send an email to the contact email address on allstarlink.org and ask them to use a different port number for you. I'm curious as to why they would block that port? Suppose they don't want folks to make their own phone systems and circumventing theirs? ~Benjamin, KB9LFZ On Mon, 2013-02-04 at 14:33 -0800, Scott M wrote:
Hi Thanks for the ideas, i removed the router and still no joy. My service provider has it blocked and will not open it. Looks like i will have to use a proxy server. Thanks again 73 Scott VA3XY
Benjamin L. Naber <Benjamin@kb9lfz.com> To: Scott M <va3xy@yahoo.ca> Cc: "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org> Sent: Monday, February 4, 2013 5:08:23 PM Subject: Re: [Bulk] [App_rpt-users] connection
I don't mean to insult your intelligence, but the best of us make simple errors.
Check your portforward. Make sure port 4569 is the source and 4569 is the port going to your allstarlink node.
Some routers will allow to you specify a source IP or network, make sure it's blank or 0.0.0.0 to allow all incoming connections to that port.
If you are not using your DMZ, and all else fails, set the allstarlink node computer on the DMZ. Not a good idea, but do that temporarily to see if that help solve some issues.
~Benjamin, KB9LFZ Allstar node 28569
On Mon, 2013-02-04 at 07:35 -0800, Scott M wrote:
Hi I cannot receive connections to my node 29310 i have the router portforwarded to 4569 udp. thanks for any help. Scott va3xy _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users