On 30/07/2015 6:55 AM, Doug Crompton wrote:
I believe multiple echolinks, assuming you have multiple public IP's need to be setup on different servers each port forwarded from a different public IP. You would need multiple routers since you cannot route the same (echolink) ports to different LAN addresses on the same router. Unlike Allstar you have no control over the ports. They are fixed.
Perhaps VPN would work in this situation but you would still need multiple servers. Echolink is NOT allstar but then we all know that. Thank God for Allstar!
Not necessarily. The OP stated they have multiple IP addresses available, presumably on the one server (similar to I have on the Echolink/IRLP reflector box that I run). The question as I understand it is whether it was possible to run multiple Echolink configurations, each bound to a different public IP on the same box.
*73 Doug WA3DSP http://www.crompton.com/hamradio*
------------------------------------------------------------------------ Date: Wed, 29 Jul 2015 14:11:26 -0500 From: lorentedford@gmail.com To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] Multiple Echolink Server side
Hi again its loren was curious on how to setup multiple echolink configurations with the rpt.conf and echolink.conf
On the server side I can get as many ips as needed however my issue is how can i get these services to work together..
I have enough bandwidth and grunt power just need some advice on how to set it up properly.
Loren Tedford (KC9ZHV) Email: lorentedford@gmail.com <mailto:lorentedford@gmail.com> Phone: 618-553-0806 http://www.lorentedford.com <http://www.lorentedford.com/> http://www.kc9zhv.com http://hub.kc9zhv.com
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- 73 de Tony VK3JED/VK3IRL http://vkradio.com