Kyle, Yes, the RPI1 can run a version of DIAL. We actually built DIAL on it first. After the RPi2 came out, we moved development over the the RPi2. The RPi1 does not work "well" with the USB port. Using as a hub or to support SIP devices is quite possible. The existing RPi2 DIAL image will not boot on a RPi1. I don't know if it would be a official distribution hosted by AllStarLink. I have 2 hardware platforms in the queue before I circle around back to RPi1. The scripts and patches I use to build DIAL are available on <https://github.com/N4IRS/AllStar> if you want to work with it. 73, Steve N4IRS On 10/28/2015 12:40 AM, K Yoksh wrote:
Not sure if this has been asked already...
Will the DIAL distro work on a Pi B? I am happily running it on a PC and also on a Pi2...
I have a Pi B sitting here that I'd like to try running some SIP phones on, maybe a hub node?
The CPU usage under Debian seems much lower, maybe the Pi B can be useful too?
Thanks. 73
Kyle K0KN
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- "Anything is possible if you don't know what you are talking about." 1st Law of Logic