First off, great work on the new DIAL to replace ACID... A couple issues I have been having, one after a reboot of the computer - rare I know but always good to test, the transmitter keys up for some odd reason, in duplex=2 Second issue, /var/lib/asterisk/rpt_extnodes does not show my node 28344... I have it setup on port 4570 and fwd setup correctly - manually setup in rpt.conf the IP/port to my other test server on ACID - and can connect, but can't connect to/from any other nodes. anyone have an idea what could be going on here? Why does it key up til the timeout time runs out and why is my node not showing up in the rpt_extnodes? Also is usbradio still supported? Does simpleusb have new features? I ask because the simpleusb.conf originally had 'carrier from=dsp' just thought maybe it supports PL decode or something? simpleusb.conf [general] [usb28344] hdwtype=0 rxboost=1 txboost=1 carrierfrom=usb ctcssfrom=usb txmixa=voice txmixb=no invertptt=0 duplex=1 rxondelay=0 eeprom=0 simpleusb_tune.... [usb28344] ; name=usb28344 ; devicenum=1 devstr=3-2:1.0 rxmixerset=500 txmixaset=100 txmixbset=100 rpt.conf [28344] ; Change this to your assigned node number rxchannel=Simpleusb/usb28344 duplex=2 erxgain=-3 etxgain=3 ;controlstates=controlstates scheduler=schedule28344 morse=morse28344 macro=macro28344 functions=functions28344 phone_functions=functions28344 link_functions=functions28344 telemetry=telemetry wait_times=wait-times context = radio callerid = "Repeater" <0000000000> idrecording = |iKC7DMF accountcode=RADIO hangtime=100 althangtime=100 totime=170000 idtime=540000 politeid=3000 73's Mark KC7DMF