OK, I'm going to ask if there ongoing efforts to package or provide install schemes for different hardware? I have had a node running for years on an old P4 just fine. For a low-power, fanless box I've gravitated toward the HP Thin clients, which really aren't that bad. 1.0Ghz AMD Geode, 512MB ram and an upgrade to a 44-pin 8GB Compact Flash. I have a need to build and remotely deploy three of these and would like a common install to manage. I do the standard noatime and tmpfs changes to keep the flash quiet and happy. ACID won't install on Thin Clients; XIPAR will install but takes about 3-4 hours and doesn't do MDC1200 or record traffic that I need (acid archives). I can install Debian 7.1 in about 20 minutes and it absolutely flies. Asterisk 1.8 and the current ACID SVN all compile under Debian but I can't get it to work with the URI interface. Dmesg and lspci show the URI but Allstar using the "radio tune" shows the card as "-1". I have a whole weekend in this latest build attempt. It would seem that out in the real world you can install Asterisk on anything, and that is the spirit of open-source. What would be required to get app_rpt and some of the chan stuff to run on "commodity" installs (apt-get install asterisk for example)? A lot of this is over my head, but I'm willing to try. I realize that some builds were customized for a point in time, so that begs the question about modern day attempts (Debian 7.1 runs the 3.2.0-4-686-pae kernel). Thanks Kirk for your script, but I found out late last night it doesn't use the same hardware that I do. Thanks. Tony (27129/27418/27460)