People care :) Looking forward to your instructions so we can keep updating ASL. Thanks for sorting this out. On Fri, Jul 13, 2018 at 2:45 PM JJC <cummingsj@gmail.com> wrote:
Good news, I have made it all work flawlessly! There were a few tweaks that I had to make within pulseaudio in terms of some buffer values and the correct sample rate and boom, I have clean audio now without the use of OSS which means I can have an updated kernel! While there are a few different moving parts, it's actually somewhat trivial.. I'll put together directions if anyone else cares lol...
JJC N0PKT
On Thu, Jul 12, 2018 at 10:37 PM JJC <cummingsj@gmail.com> wrote:
Started a new thread since the old one was hijacked a little bit..
At any rate, I have a current raspbian kernal (without OSS) and I have done the following:
1. disabled onboard audio (just blacklisting the KM for the device) 2. configured ALSA to use the C-Media device (URIx) for default audio 3. installed pulseaudio 4. installed osspd 5. start pulseaudio 6. stard osspd defining --adsp as dsp1 and as a padsp slave 7. start asterisk
It's not perfect yet, but I do have ASL receiving audio from the URIx and transmitting audio through the URIx.. it's not clear audio.. maybe audio levels? Also note that there i an osspd-alsa but that doesn't work.. when I try that it causes the usb closed errors that I had posted in the other thread and ASL won't get past that point.
Unfortunately the site is far enough away that I can't get to the device and put it on the bench.. a user is reporting that "tones" are what he is hearing after he unkeys
If I can figure out the rest I'll be publishing all of the things that need to be edited to 'get-er-done' until then I'll be playing with it... any input/ideas/feedback is welcome!
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Tim WD6AWP