Check /etc/resolv.conf and ensure the DNS is defined and operational Check /etc/mail/sendmail.cf for FQDN that is not being resolved Check /etc/host for local definitions. The major hangs on boot is typically DNS related so that's where you could start… Just my 2 cents… good luck!!! _______________________________ Paul J. Agamata Sysman@Xceptions.COM Hilo, Hawaii [cid:68C7D415-6E4E-4DB1-BB85-FD7BC05FCC61] From: Bryan Boyle <bdboyle@bdboyle.com<mailto:bdboyle@bdboyle.com>> Date: Sun, 26 Jun 2011 14:29:50 -1000 To: Paul Agamata <Sysman@Xceptions.COM<mailto:Sysman@Xceptions.COM>> Cc: Jah Rastafari <nuhtrue@gmail.com<mailto:nuhtrue@gmail.com>>, "app_rpt-users@ohnosec.org<mailto:app_rpt-users@ohnosec.org>" <app_rpt-users@ohnosec.org<mailto:app_rpt-users@ohnosec.org>> Subject: Re: [App_rpt-users] ACID boot hang fwIw...google's haven't failed me in 3 yrs...8.8.8.8 and 8.8.4.4. -- Bryan Sent from my iPhone please forgive misspellings... On Jun 26, 2011, at 7:53 PM, "Paul J. Agamata" <Sysman@Xceptions.COM<mailto:Sysman@Xceptions.COM>> wrote: This is usually indicative of your DNS not operating properly. Sendmail and it's client tend to want DNS running so it can resolve addresses. Regards, Paul _______________________________ Paul J. Agamata <Sysman@Xceptions.COM>Sysman@Xceptions.COM<mailto:Sysman@Xceptions.COM> Hilo, Hawaii <image.jpg> From: Jah Rastafari <<mailto:nuhtrue@gmail.com>nuhtrue@gmail.com<mailto:nuhtrue@gmail.com>> Date: Sun, 26 Jun 2011 12:50:26 -1000 To: "<mailto:app_rpt-users@ohnosec.org>app_rpt-users@ohnosec.org<mailto:app_rpt-users@ohnosec.org>" <<mailto:app_rpt-users@ohnosec.org>app_rpt-users@ohnosec.org<mailto:app_rpt-users@ohnosec.org>> Subject: [App_rpt-users] ACID boot hang Any idea why an otherwise perfectly operating system running the ACID distro would hang while booting for: sendmail - approx 6 min sm-client - approx 3 min They both eventually load (green "OK") but it just makes booting take somewhere south of 10 minutes. The started when I loaded the latest distro (as of about 3 weeks ago). Any clues or advice on what details I could add other than what's below? Thanks, Bob KK6RQ Using simpleusb No modifications other than setting levels. _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org<mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
