Mine would lockup as well had to power cycle it, I upgraded to DIAL I don't see that problem anymore. Been running DIAL for a while now I use to have this lockup couple times a week. On 3/18/2016 7:18 AM, mike@midnighteng.com wrote:
If you have updated system files, you might want to re-compile.
You might also want to turn off all built-in devices not in use in the bios set-up. (parallel,serial, sound, some usb hubs etc) IRQ / PNP issues. And force a update to the PNP data when done if not automatic.
Process of elimination in the end.
...mike/kb8jnm
I have an ACID distribution running. Last night I ran an "astres.sh" after minor change to the rpt.conf file, and everything went away. No radio, no internet, just dead. Details below. Has anyone dealt with this? {This is a Dell PC and an URI.}
I went to the repeater site and found the monitor filled with "cannot submit datapipe for urb 0, error -22: internal error"
The last line was partially truncated. The keyboard was dead. Pressing the power button did not start a shutdown. Finally holding the power button down to dump the power and then restarting the machine brought things back to life. Any information appreciated.
...STeve - KF5VH
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.