Ah, thanks Jim, yes I can see how that would make sense if the app parses the file from top to bottom and stops at the first valid code it gets to. Obvious really I guess! Doh! Cheers, Matt 2009/5/26 James Nessen <nessenj@jimsoffice.org>
I found that doing this helps:
941 = cop,something 942 = cop,something else 943 = cop,foo 94 = cop,do something now
Jim K6JWN
On Tue, May 26, 2009 at 2:21 PM, Matt Beasant <g4rky@yahoo.co.uk> wrote:
Hi,
Just as a heads up to anyone new reading this and learning about app_rpt and also as a question to the more experienced node owners out there, I have noticed a little niggle with the DTMF tone sequences used to activate functions on app_rpt.
Here's the scenario:
In my rpt.conf I have a function:
94 = cop,something or other
All is fine until I try and add a command 941 to do something else.
The new code wont work and app_rpt seems to ignore the extra digit on the end and just activates the function that is associated with the code 94.
I'm not sure if this is really a bug or not but it certainly had me teased for a good few hours recently when I was adding some new functions to my node.
I was expecting code 941 to work but it just wasnt - I was testing a new feature which had been added and I wasnt sure if I had busted the feature or something else had gone wrong!
I changed the code to 95 and all worked as expected!
Just something to be aware of really I guess unless its an easy fix for the app?
Cheers,
Matt G4RKY Node 2250
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
-- Jim Nessen K6JWN Email: nessenj@jimsoffice.org | Ph: 530.979.0894 IRLP: Nodes 3598 and 3633 | Echolink: 83598 K6JWN-R | AllStar: Nodes 2142 and 2165
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users