not enough tx audio problem ive been having. i cant get anymore than 1.1khz max dieviation out of it using the uri. if i use the uri amplifier to boost the audio , i get somewhere around 2.5khz, i am able to her that it is clearly distorted and choppy audio. so , ive got a digital capable uhf r2 msf5000. it worked great as a stand alone ham band repeater on 442.925 and the audio - everything was fine using its own controller. so i changed the codeplug to what some guy WA1??? on repeater-builder recommended for the settings for using an external controller. because i want the allstar box to control the whole box. i preferred dsp for audio. i soldered to the TP2 ,3,4,and TP9 test point to get my audio and everything else. i want to use those because it said the tp for reciever audio is pre-emphasis. so all the wires go to one area and then all my connections are soldered to the corresponding TestPoint connectors. so i tried making a interface cable to the j2 side mount plug (the 25pin on the side of the station) same result on audio. i used line 2+ and line 4+ for the audio. With the audio maxed out -still 1.1 khz coming out with no audio amp and about 2.6khz and distorted and choppy coming out with the audio amp. anything come to mind? i hope to get this figured out , so i can interface the next msf. where did y'all interface your uri's to an msf? thanks so much , james kd5oxm