The node looks good here - grep 27086 /tmp/rpt_extnodes 27086=radio@72.224.76.51:4569/27086,72.224.76.51 If you are running Acid on a PC then grep 27086 /var/lib/asterisk/rpt_extnodes 27086=radio@72.224.76.51:4569/27086,72.224.76.51 Sometimes you have to reboot or restart. Are you registered? CLI>iax2 show registry What is the failure? No response or an actual failure voice message? Also any CLI messages? 73 Doug WA3DSP http://www.crompton.com/hamradio Date: Fri, 12 Sep 2014 11:36:47 -0400 From: N1XBM@amsat.org To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] Connection failed So the power was cut to the building my repeater is in. My repeater functions, I'm able to connect via IAX. I'm also able to SSH in and ping the IP of the node I'm trying to connect too (27066) I'm also able to ping google.com. but when I go to the CLI and type rpt fun 27086 *327066 it fails. So what gives? I'm running acid and a DMK URI. _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.