Well it looks like the modified USB fob was defective or not quite compatible. ***Anyone want to buy some 100 watt 440 to 470 MHz Tait Repeaters? I can program the frequencies and PL codes. w7ry at arrl.net directly. Documentation is downloadable from the internet. 73 Jim W7RY From: Eric Guth Sent: Monday, November 19, 2012 9:40 AM To: Jim W7RY Subject: RE: [App_rpt-users] Receive Adjustment Failed By the way, this chip is common on most brands of this vintage radio. On my Allstar node I connected pin 9 through a 10 uf cap in the radio to the input of my URI. Folks tell me my audio is excellent. I use the signal processing of the app_rpt for squelch and CTCSS. From: Jim W7RY [mailto:w7ry@centurytel.net] Sent: Monday, November 19, 2012 5:53 PM To: Eric Guth Subject: Re: [App_rpt-users] Receive Adjustment Failed T855 UHF receiver and T857EX UHF Transmitter. These are T800 II series. Program with a PC. I tried several points. None seem to work correctly. Thanks and 73! Jim W7RY From: Eric Guth Sent: Sunday, November 18, 2012 1:15 AM To: Jim W7RY Subject: RE: [App_rpt-users] Receive Adjustment Failed Jim - which Tate equipment are you using and where did you pick off the discriminator audio? 73, Eric 4Z5UG / WA6IGR Allstar Node: 28422 4Z5UG@guth.us Israel Direct: 077-950-9451 USA Direct: +1-720-377-3840 From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Jim W7RY Sent: Saturday, November 17, 2012 7:48 AM To: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Receive Adjustment Failed Well I made some progress.... Found a different place to pick off discriminator audio. I’m using Tate equipment and this is my first time working with it. The info that I have is lacking. Guess I need to get in touch with some of me mates down-under to set me straight! Anyway, I think it got it where I need if for now. Thanks 73 Jim W7RY From: Jim W7RY Sent: Friday, November 16, 2012 8:29 PM To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] Receive Adjustment Failed Any idea guys? I tried rxboost=1 and rxboots=0 and same results. I know there is audio at the receive input because I have good quality repeater audio. But have a long squelch burst on dekay of the subscriber. This is a modified CM108 USB fob. Thanks for all the great help! 73 Jim W7RY Please enter your selection now: 2 tune rxnoise maxtries=12, target=27000, tolerance=2750 tries=0, setting=2, meas=32767 tries=1, setting=2, meas=32767 tries=2, setting=2, meas=32767 tries=3, setting=2, meas=32767 tries=4, setting=1, meas=32767 tries=5, setting=1, meas=32767 tries=6, setting=1, meas=32767 tries=7, setting=1, meas=32767 tries=8, setting=1, meas=32767 tries=9, setting=1, meas=32767 tries=10, setting=1, meas=32767 tries=11, setting=1, meas=32767 DONE tries=12, setting=63, meas=32767, sqnoise=13206 ERROR: RX INPUT ADJUST FAILED. -------------------------------------------------------------------------------- _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users