Torben, I went back and looked at your original message and you talked about a database problem. I messaged back the method to check the echolink database. Did you do that? Is the call/IP address of the echolink station you want to call in your local database? If you are not getting the database it isn't going to work. echolink dbget c WA3DSP-L The call has to be exact including case but you can do echolink dbdump to see the entire database. It is hard to see in the client mode so at linux prompt do... asterisk -rx "echolink dbdump" | more or asterisk -rx "echolink dbdump" > filename to save it to a file for viewing. 73 Doug WA3DSP http://www.crompton.com/hamradio From: torben@klimt-online.com To: mike@midnighteng.com; app_rpt-users@ohnosec.org Date: Wed, 12 Feb 2014 11:22:41 +0100 Subject: Re: [App_rpt-users] Re :__Problems_with_Echolink possible is of course everything but i don`t think that there is any problem with the router software BUT we have many problems with the internetconnection at the repeater location. sometimes there is no more signal so we must restart the router/modem (all included; AVM Fritzbox) any other ideas or issues to solve the prob ? Von: app_rpt-users-bounces@ohnosec.org [app_rpt-users-bounces@ohnosec.org] im Auftrag von mike@midnighteng.com [mike@midnighteng.com] Gesendet: Dienstag, 11. Februar 2014 19:23 An: app_rpt-users@ohnosec.org Betreff: Re: [App_rpt-users] Re :__Problems_with_Echolink Just a hunch here.... It kinda sounds like a router issue as strange as that may seem but not exactly the router... Is there anything else on the network (computers) that could have a piece of malware on it ? I have seen many a "unidentified malware" exploit router security and play with the router settings in router ram without writing them to NVRam. This type of malware eventually uses the host as a forwarding hub for data they have collected elsewhere to hide source of where it is going. While it it easy to find the infected computer, much harder to find the files on that computer. Keeping router firmware up to date or using a newer router can help. Just a thought if you are unable to locate the problem. ...mike/kb8jnm -------- Original Message -------- Subject: Re: [App_rpt-users] Re :__Problems_with_Echolink From: Doug Crompton <doug@crompton.com> Date: Tue, February 11, 2014 12:44 pm To: "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org> The command is 'echolink dbdump" [root@WA3DSP_Allstar wa3dsp]# asterisk -rx "echolink dbdump" | grep WA3DSP 147090|WA3DSP-L|50.191.8.33 You can also use dbget WA3DSP_Allstar*CLI> echolink dbget c WA3DSP-L 147090|WA3DSP-L|50.191.8.33 To dump the entire database so you can look at it do asterisk -rx "echolink dbdump" > echolink.txt echolink.txt can be any filename and directory you want. Then do less echolink.txt To look through the file. 73 Doug WA3DSP http://www.crompton.com/hamradio Date: Tue, 11 Feb 2014 11:50:32 -0500 From: petem001@hotmail.com To: torben@klimt-online.com; app_rpt-users@ohnosec.org Subject: [App_rpt-users] Re : Problems with Echolink I have the same problem. --- Message initial --- De : torben@klimt-online.com Envoyé : 11 février 2014 07:40 A : app_rpt-users@ohnosec.org Objet : [App_rpt-users] Problems with Echolink hi all, i have problems with echolink on my node. after running allstar more then xx days it is not possible to connect out but it is possible to connect the node. ithink there is a file / database with the information nodenumber/ip/call and that file is not up to date. after restarting allstarlink all is working well any ideas ? tnx 73 de torben dh6mbt _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.