Node 2030 will be down for 24 hours more Kent W7AOR Las Vegas -----Original Message----- From: app_rpt-bounces@lists.illiana.net [mailto:app_rpt-bounces@lists.illiana.net] On Behalf Of app_rpt-request@lists.illiana.net Sent: Wednesday, November 14, 2007 11:49 AM To: app_rpt@lists.illiana.net Subject: App_rpt Digest, Vol 21, Issue 3 Send App_rpt mailing list submissions to app_rpt@lists.illiana.net To subscribe or unsubscribe via the World Wide Web, visit http://lists.illiana.net/mailman/listinfo/app_rpt or, via email, send a message with subject or body 'help' to app_rpt-request@lists.illiana.net You can reach the person managing the list at app_rpt-owner@lists.illiana.net When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt digest..." Today's Topics: 1. test message (Stephen Rodgers) 2. Re: test message (n4charlielimaalpha) 3. Re: test message (Stephen Rodgers) 4. Re: test message (n4charlielimaalpha) 5. configurable system state (Mark Hagler) 6. Testing (Bryan) 7. Re: configurable system state (Stephen Rodgers) 8. Node 2000 just disconnected! (Roger F. Jordan) 9. Re: Node 2000 just disconnected! (Stephen Rodgers) 10. Rpt access while disabled (Mark Hagler) 11. Re: Rpt access while disabled (hwstar@rodgers.sdcoxmail.com) ---------------------------------------------------------------------- Message: 1 Date: Fri, 09 Nov 2007 18:03:41 -0800 From: Stephen Rodgers <hwstar@rodgers.sdcoxmail.com> Subject: [App_rpt] test message To: Asterisk Repeater Controler <app_rpt@lists.illiana.net> Message-ID: <4735117D.8090909@rodgers.sdcoxmail.com> Content-Type: text/plain; charset=ISO-8859-1 This is a test ------------------------------ Message: 2 Date: Fri, 09 Nov 2007 21:28:52 -0500 From: n4charlielimaalpha <n4charlielimaalpha@gmail.com> Subject: Re: [App_rpt] test message To: Asterisk Repeater Controler <app_rpt@lists.illiana.net> Message-ID: <47351764.40001@gmail.com> Content-Type: text/plain; charset="us-ascii" An HTML attachment was scrubbed... URL: http://lists.illiana.net/pipermail/app_rpt/attachments/20071110/4135cb37/att achment-0001.htm ------------------------------ Message: 3 Date: Fri, 09 Nov 2007 19:45:21 -0800 From: Stephen Rodgers <hwstar@rodgers.sdcoxmail.com> Subject: Re: [App_rpt] test message To: Asterisk Repeater Controler <app_rpt@lists.illiana.net> Message-ID: <47352951.5080803@rodgers.sdcoxmail.com> Content-Type: text/plain; charset=ISO-8859-1 n4charlielimaalpha wrote:
Stephen Good evening,
Would you please reply to this message for me so that I know that my access to this board works and that my replies work.
Thanks
Fred Moore
Stephen Rodgers wrote:
This is a test _______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
------------------------------------------------------------------------
_______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt Here you go.
------------------------------ Message: 4 Date: Fri, 09 Nov 2007 22:54:32 -0500 From: n4charlielimaalpha <n4charlielimaalpha@gmail.com> Subject: Re: [App_rpt] test message To: Asterisk Repeater Controler <app_rpt@lists.illiana.net> Message-ID: <47352B78.7030906@gmail.com> Content-Type: text/plain; charset="us-ascii" An HTML attachment was scrubbed... URL: http://lists.illiana.net/pipermail/app_rpt/attachments/20071110/8bf85462/att achment-0001.htm ------------------------------ Message: 5 Date: Sat, 10 Nov 2007 00:10:47 -0800 From: "Mark Hagler" <markhagler@gmail.com> Subject: [App_rpt] configurable system state To: "Asterisk Repeater Controler" <app_rpt@lists.illiana.net> Message-ID: <c7a95c90711100010v61eba2depe84d3f759645321f@mail.gmail.com> Content-Type: text/plain; charset=ISO-8859-1 I see in the code there's two control op commands to affect the system state: * 13 - Query System State * 14 - Change System State Is there an example rpt.conf floating around that shows how to set up multiple system states that could be selected with this command? Thanks, Mark ------------------------------ Message: 6 Date: Sat, 10 Nov 2007 17:34:52 -0400 From: Bryan <bryan@uwavecom.net> Subject: [App_rpt] Testing To: Asterisk Repeater Controler <app_rpt@lists.illiana.net> Message-ID: <200711101634.53433.bryan@uwavecom.net> Content-Type: text/plain; charset="us-ascii" Please ignore. Thank you, Bryan Fields, MLM admin ------------------------------ Message: 7 Date: Sat, 10 Nov 2007 14:14:53 -0800 From: Stephen Rodgers <hwstar@rodgers.sdcoxmail.com> Subject: Re: [App_rpt] configurable system state To: Asterisk Repeater Controler <app_rpt@lists.illiana.net> Message-ID: <47362D5D.7000006@rodgers.sdcoxmail.com> Content-Type: text/plain; charset=ISO-8859-1 These are documented in the rpt.conf.sample file under [controlstates]: https://www.xelatec.com/viewvc/app_rpt/asterisk/trunk/configs/rpt.conf.sampl e?view=log You can also use the scheduler and macros to switch to different operating modes at different times ala cron. WA6ZFT Steve Mark Hagler wrote:
I see in the code there's two control op commands to affect the system state:
* 13 - Query System State * 14 - Change System State
Is there an example rpt.conf floating around that shows how to set up multiple system states that could be selected with this command?
Thanks,
Mark _______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
------------------------------ Message: 8 Date: Sun, 11 Nov 2007 11:58:21 -0500 From: "Roger F. Jordan" <w4rfj@comcast.net> Subject: [App_rpt] Node 2000 just disconnected! To: <app_rpt@lists.illiana.net> Message-ID: <mailman.24.1195069762.2636.app_rpt@lists.illiana.net> Content-Type: text/plain; charset="us-ascii" Steve, Just wanted to let you know the node 2000 just disconnected me... Do you want me to reconnect! Roger W4RFJ ------------------------------ Message: 9 Date: Sun, 11 Nov 2007 11:02:20 -0800 From: Stephen Rodgers <hwstar@rodgers.sdcoxmail.com> Subject: Re: [App_rpt] Node 2000 just disconnected! To: Asterisk Repeater Controler <app_rpt@lists.illiana.net> Message-ID: <473751BC.3050107@rodgers.sdcoxmail.com> Content-Type: text/plain; charset=ISO-8859-1 Roger I disconnected it. Your node was the source of the dead key. Do you have an ARIB card hooked up and/or a phone off hook on the receive port? Steve. Roger F. Jordan wrote:
Steve,
Just wanted to let you know the node 2000 just disconnected me... Do you want me to reconnect!
Roger W4RFJ
_______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
------------------------------ Message: 10 Date: Tue, 13 Nov 2007 22:38:19 -0800 From: "Mark Hagler" <markhagler@gmail.com> Subject: [App_rpt] Rpt access while disabled To: "Asterisk Repeater Controler" <app_rpt@lists.illiana.net> Message-ID: <c7a95c90711132238x21946ca0pc5296a7cee1b70f9@mail.gmail.com> Content-Type: text/plain; charset=ISO-8859-1 I wonder if anybody has a workaround for this: The repeater this afternoon was picking up some awful interference on the input and was transmitting it constantly. I have a phone number in my Asterisk dialplan that starts the Rpt application into the repeater using the P flag. Using this phone-line control interface I was able to dial the digits for the control op command to disable the repeater. Now, I'd like to enable it again using the same method, except apparently you can't connect in with the Rpt application if TX is already disabled. I get this error: -- Executing [573@stations:1] Rpt("SIP/700-095735c0", "1|P") in new stack [Nov 13 22:35:20] NOTICE[1815]: app_rpt.c:10987 rpt_exec: Connect attempt to node 1 with tx disabled Is there a way to come in remotely via the phone and enable a disabled repeater again? Thanks, Mark Hagler W7WMH ------------------------------ Message: 11 Date: Wed, 14 Nov 2007 11:49:17 -0800 From: <hwstar@rodgers.sdcoxmail.com> Subject: Re: [App_rpt] Rpt access while disabled To: Asterisk Repeater Controler <app_rpt@lists.illiana.net> Message-ID: <20071114194917.HOYP18026.dukecmmtao05.coxmail.com@dukecmimpo01.coxmail.com> Content-Type: text/plain; charset=ISO-8859-1 Mark, Sounds like a bug in app_rpt. I will try to duplicate tonight. There's no reason I can think of why phone access ought to be disabled in this case. My guess is that this is something which was overlooked when we wanted to prevent nodes from connecting to a disabled repeater. This should be quite fixable. Steve.
From: "Mark Hagler" <markhagler@gmail.com> Date: 2007/11/13 Tue PM 10:38:19 PST To: "Asterisk Repeater Controler" <app_rpt@lists.illiana.net> Subject: [App_rpt] Rpt access while disabled
I wonder if anybody has a workaround for this:
The repeater this afternoon was picking up some awful interference on the input and was transmitting it constantly. I have a phone number in my Asterisk dialplan that starts the Rpt application into the repeater using the P flag.
Using this phone-line control interface I was able to dial the digits for the control op command to disable the repeater.
Now, I'd like to enable it again using the same method, except apparently you can't connect in with the Rpt application if TX is already disabled. I get this error:
-- Executing [573@stations:1] Rpt("SIP/700-095735c0", "1|P") in new
stack
[Nov 13 22:35:20] NOTICE[1815]: app_rpt.c:10987 rpt_exec: Connect attempt to node 1 with tx disabled
Is there a way to come in remotely via the phone and enable a disabled repeater again?
Thanks,
Mark Hagler W7WMH _______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt
------------------------------ _______________________________________________ App_rpt mailing list App_rpt@lists.illiana.net http://lists.illiana.net/mailman/listinfo/app_rpt End of App_rpt Digest, Vol 21, Issue 3 **************************************