He can use wifi if he use our band. Ubiquity sell device that can be programmed in the 2300 mhz band. No problem with other signal. I am using 2 bullet that way, in 3 miles link and all is well.. My router is a wrt54g, but running dd-wrt. It has qos. Set at the mac adress level. All packet comming or going to the mac of my all star node is prioritary no matter what. Envoyé de mon iPad Le 9 May 2013 à 21:49, "Benjamin L. Naber" <Benjamin@kb9lfz.com> a écrit :
If I were you, I would not use Wi-Fi, especially if you are connecting to a home wireless router / access point.
I can see and understand the advantages of Wi-Fi, but when it comes to time sensitive RTP packets, unless it's the only user of Wi-Fi, then you are going to have issues when the Wi-Fi has more users.
Also, while you may setup a Wi-Fi router/access point just for the allstar node, you need to account for the other folks in your area (if any) that are already using Wi-Fi or around the same frequency that you setup the node on. Remember that bandwidth of some Wi-Fi modes are as small as 1 MHz, and will run as much as 40 MHz.
If you have an Android phone, download the app called "Wifi Analyzer". You have a decent idea who else is using Wi-Fi around you. You can also download a program for Windoz called "Netstumbler" also detects Wi-Fi access points, but with better range.
May I suggest you just run an Ethernet cable to it? It will save you some headaches, as well is trying to find the drivers for it for the Wi-Fi card.
Allstar is just a specialized configuration of Asterisk. Asterisk will run on just about any Linux distribution. It may run on other operating systems, but I have never used Asterisk on anything but Linux.
If you have an Ubuntu Desktop (or Server) version running on a laptop or desktop, you can install asterisk, and then manually enter in the programming you get from the allstarlink.org website. It's not any secret, just will take a while to do a lot of configuration changes. Some folks have done that because they have other things they are doing with Allstar and the machines that has it also does other functions. After a couple higher priority projects are completed, I will be rolling my own as well.
www.ohnosec.org and allstarlink.org well help you setup ACiD, as well as assist with other configuration changes. It's really as simple as following the prompts for downloading the preconfigured "server" and "node" on your machine.
~Benjamin, KB9LFZ Allstar node 28569
On Thu, 2013-05-09 at 15:49 -0400, wa3lco@velocity.net wrote:
I am a noobie with the Allstar System. I had a working copy of Linux Ubuntu on a machine and decided to install the Acid install on it to simplify Allstar setup. I did have Asterisk and all running but just couldn't find the assistance to get the thing working.
Anyway, I now have a glitch where the Acid install doesn't see my Wifi card so I assume that there is a driver missing for it. How do I go about installing this driver. Obviously there must be a Linux flavor around as it worked fine with Ubuntu.
Out of curiosity, has anyone set up the Allstar on Ubuntu?
73
Floyd WA3LCO wa3lco@velocity.net
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users