Yep, that part is solved. Now I think I have a defective URI. The input works just fine, and has very good audio, COR works, the PTT works, but I just can't get it to make any sort of noise or play a file. Echo seems to playback the correct length, *81 appears to be playing the files, and rpt localplay seem to be playing the file I indicate, but no sound. I have tried a variety of values between 10 and 999, and even put it on the scope, but see no audio (not even a blip). I have both left and right set to voice (tried all combinations). Question: I noticed in rpt.conf there is a line "rxchannel=Radio/usb27238", should there be a TXCHANNEL ? I have two more free days to play with it this year, then I'll have to bin it until mid January (Holiday work schedule). Thanks Gary KB2BSL From: hotmail_97fc649978f54bf0@live.com [mailto:hotmail_97fc649978f54bf0@live.com] On Behalf Of Doug Crompton Sent: Thursday, November 07, 2013 7:47 PM To: Gary Lindtner (KB2BSL) Cc: app_rpt-users@ohnosec.org Subject: RE: [App_rpt-users] I seem to be stuck Good to hear you found the problem. Like I said it is always the little things! 73 Doug WA3DSP http://www.crompton.com/hamradio _____ From: kb2bsl@kc2ra.org CC: app_rpt-users@ohnosec.org Date: Thu, 7 Nov 2013 18:25:20 -0500 Subject: Re: [App_rpt-users] I seem to be stuck Seems to actually have been something even simpler, and embarrassing, seems my lab radio needs inverted COR. Damn Gary KB2BSL From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of Gary Lindtner (KB2BSL) Sent: Thursday, November 07, 2013 6:03 PM Cc: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] I seem to be stuck Doug, That was one of the first things I checked: ; Radio Repeater configuration file (for use with app_rpt) ; ; ; Your Repeater ; [27238] ; Change this to your assigned node number rxchannel=Radio/usb27238 duplex=0 erxgain=-3 etxgain=3 ;controlstates=controlstates scheduler=schedule27238 morse=morse27238 macro=macro27238 functions=functions27238 phone_functions=functions27238 link_functions=functions27238 Thanks Gary KB2BSL From: hotmail_97fc649978f54bf0@live.com [mailto:hotmail_97fc649978f54bf0@live.com] On Behalf Of Doug Crompton Sent: Thursday, November 07, 2013 5:38 PM To: Gary Lindtner (KB2BSL) Cc: app_rpt-users@ohnosec.org Subject: RE: [App_rpt-users] I seem to be stuck Gary, Not sure if this is your problem but it bit me and drove me crazy when I first came up. The sample rpt.conf assumes repeater mode. I was using a simplex transceiver and I thought something was wrong with my URI. As soon as I transmitted it lost the COR signal. Since I was concentrating on that I did not realize the transmitter was keying and thus it was losing receive. Duh! It the little things that get you. If you have duplex=2 (or anything higher) in rpt.conf it will act like a repeater. When it sees an RX signal it will key PTT. If you are using it as a simplex node you want to set duplex = 0 or 1, 0 for no telemetry (courtesy tones) or 1 for tones. 73 Doug WA3DSP http://www.crompton.com/hamradio _____ From: kb2bsl@kc2ra.org To: app_rpt-users@ohnosec.org Date: Thu, 7 Nov 2013 17:02:12 -0500 Subject: [App_rpt-users] I seem to be stuck Setting up a new node and have run into a problem. Whilst trying to use the Echo command in "radio-tune-menu" (Step 6, "kind of acceptible"), the radio immediately keys when COR is present. Additionally, the action of "rpt fun 27238 *81" should key the radio and give the time and date, the CLI is certainly indicating it's doing so, but the radio never keys and gives the announcement. The commands "radio key" and "radio unkey" work, so did function 3, so the URI appears to be working, and the cable and radio audio path have been checked with an audio generator and scope. I have verified the web config is set to simplex, usbradio, URI, Carrier from USB, and other settings. And have pushed it to the server several times. Additionally, I have checked usbradio.conf and rpt.conf to ensure the settings made it to the node. And have of course restarted. Any suggestions? I apologize in advance if I missed something in the documentation. Thanks Gary KB2BSL _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users