Oh and IIRC, I was able to disable the preemphasis on the TA line. The settings s/w provides this option. Sent from my iPhone
On Feb 3, 2014, at 10:04 PM, Ramesh Dhami <Ramesh@va3uv.com> wrote:
Hi Chris,
I have the TKR850 at my site. I actually use mine I'm a dual mode DV and FM application.
You are right, the data input is limited - so I use the TD input for my GMSK (DV) input. I feed my Allstar audio into the TA input. I use an external MUX to gate the audio, so when In the FM mode, in addition to feeding the Allstar audio into the TA input, I feed the PL into the TD input.
I have been using my 850 in this arrangement for about 3 years now.
Ramesh.
Sent from my iPhone
On Feb 3, 2014, at 9:50 PM, Chris Bunting <chris@lancnet.com> wrote:
Was setting up the master site for my simulcast system over the weekend, but ran into a roadblock, any help would be appreciated.
When feeding flat Audio into "transmit data" input , the repeater maxes out at 2k deviation, no matter how much audio I feed it.
I could use the transmit audio input, but then I can't feed PL among other things into it, along with many other reasons not to use tx audio.
Anyone experience this with the kenwood highline series repeaters?
What is everyone out there using? I'm ready to auction my 2 kenwood's off and buy something else if this can't be overcome. The reason I went with the 840 and 830 is it had a 10 meg input for the clock.
Thanks, Chris Bunting Lancaster Networks, LLC | Lancaster Towers, LLC 717-459-4321 _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.