I suspect it’s something in your apache config. Try allow all for your DocumentRoot. -- Tim :wq On Apr 11, 2014, at 9:05 PM, Mal Good <malgood@gmail.com> wrote:
Hi Tim
I have setup the .htpasswd file in the manner you described. The line is located in the allmon2 dir, I checked it and it has a one line entry in the file that starts with the user name.
When I go back to the allmon page and enter the username and password it just comes up with ‘Sorry, login failed’.
Not sure where to go from here?
Mal
From: Tim Sawyer [mailto:tim.sawyer@mac.com] Sent: Friday, 11 April 2014 11:54 PM To: Malcolm Good Cc: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Allmon2 on pi remote web server
You need to set a .htpasswd file. On you web sever in the Allmon directory do:
htpasswd -c .htpasswd <desired username>
It will then prompt you for what you want the password to be. -- Tim :wq
On Apr 11, 2014, at 8:47 AM, Malcolm Good <malgood@gmail.com> wrote:
Hi Tim
Thanks, I'm glad it was something easy!
But wait there's more...
I can't get the login side of things to work. Any ideas?
Mal
sent from my Samsung Note
On 11/04/2014 9:57 PM, "Tim Sawyer" <tim.sawyer@mac.com> wrote: Did you remember to set the bindaddr in manager.conf?
;bindaddr = 127.0.0.1 ; Local interface only! bindaddr = 0.0.0.0
-- Tim :wq
On Apr 11, 2014, at 4:54 AM, Mal Good <malgood@gmail.com> wrote:
Hi
I am running a Beagle / LOX combination which is working well. I have a Raspberry Pi running as a web server, which is also running fine!
What I would like to do is run Allmon2 on the web server. This is where I am having difficulties. Has anyone done this? Or set up Allmon2 in a remote web server system? If so can you let me know what you manager.conf setting are in Asterisk and also what you allmon.ini settings are?
My router port forwarding setting, I think, are correct.
Any other help would be greatly appreciated.
Mal VK6MT
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.