The GPSDO does not interface with the RTCM at all; It does share the the 1PPS from your GPS antenna, and it can be "interfaced" with a PCGM module to move the clock from 10MHz to 14.4Mhz or other rates. On Mon, Aug 3, 2015 at 11:50 AM, Bryan Fields <Bryan@bryanfields.net> wrote:
On 8/3/15 2:29 PM, Tom Hayward wrote:
Since asking about transmitter steering, I've been looking into the feasibility of simulcast. The marginal difference between transmitter steering and simulcast (in terms of equipment) is a GPSDO and a transmitter that accepts a 10 MHz reference input. I have some leads on transmitters--Quantars or some Daniels MT-4D. Other transmitter recommendations are welcome, but what I'm really curious about is the GPSDO.
It looks like the Trimble Thunderbolt is the gold standard.
It is, and the RTCM interfaces with it. Spend the money if your time is worth it, or unless you want the enjoyment of re-engineering stuff.
At less than half the going price of Thunderbolt, you can find these BG7TBL GPSDOs: http://www.ebay.com/itm/121530825744
Some are labeled Trimble and Huawei, so I think it's safe to say they are neither. The question is: are they any good? It looks like KE5FX has done some testing: http://www.ke5fx.com/gpscomp.htm
I don't really know what to look for in the graphs, but he says in his conclusion "the BG7TBL unit is actually running at about 9.999 999 999 800 Hz". Is this a deal-breaker for simulcast? If all transmitters have a BG7TBL GPSDO, does it matter that they aren't exactly 10 MHz? Is anyone running these GPSDOs with RTCM simulcast that can comment on their performance?
I doubt it as the PLL is going to divide the signal down to 5 or 6.25 KHz, and then use it as a reference to compare it to the VCO. (in a quantar for example). This is an error of 200 uHz, but it looks like it's a consistent error (it's precision is excellent but accuracy is meh).
This is an error of 0.000020 PPM or .020 PPB. This is amazingly good. For example this is an error of 0.0185 Hz at 927 MHz. It's only going to be better lower in frequency.
This would be the difference between a true 10.000000000000000 Clock and this clock. Assuming all the clocks are the same amount off, your sites will be off a few ten thousandths of a Hz from true, but all will be the same amount off so it's not going to matter in any case.
Keep in mind the Quantar with the UHSO option is like 10 PPB and still used for simulcast in some applications at VHF/UHF since it's about 1-2 hz of error.
I've got a 220 hamtronics simulcast setup working, not really deployed it long term yet, but I'd like to. I have some Pic code posted here about my PLL programing.
73's
-- Bryan Fields
727-409-1194 - Voice 727-214-2508 - Fax http://bryanfields.net _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- KJ6QFS Sam Skolfield