After having the project sit idle for about a year, I've been getting my frequency agile remote ready to deploy. I had everything working fine on the workbench testing with iaxRpt. Then I thought, "I should update to the current version.....". So first I did a system update with "yum -y update". Then I did the Acid SVN update. Now I can't retrieve a memory defined in rpt.conf. example : 40 = 146.970,123.0,-rt Any attempt results in an "invalid frequency" response. And with a serial tracker in line I don't see data being sent to the radio. I've also tried sending it as a direct entry such as *1146*970*2. That doesn't work either. If I restart Asterisk, when I connect the first time with iaxRpt, it does send the init string. And the radio goes where it's supposed to. So I know the iospeed/port/CIV are all set right. This is using a Syntor X with an XCAT on ttyS0 at 19200. Which all worked before I did the update. Any ideas? Robert A. Poff Loganville, PA. "Lieutenant, target the offending power boat and launch photon torpedoes"