Hi All, A while ago, I was messing around flashing different firmware images on a Linksys WRT54GL v1.1 access point so I could extend the range a bit. While on that adventure, I noticed a few guys were making hardware modifications to expand their capability. Well, that sounded fun, so I proceeded to add an SD Card socket, 2 Serial Ports and 2 USB ports to that little guy. (Kismet etc. fun... the white hat version of course :-)) After playing around with that for a while, I kept thinking that the WRT54GL might be a candidate for that mobile allstar micro node I’ve been wanting to build. I already had the URIx from DMK and I heard some guys were running Asterisk on these things. The WRT54GL runs on 12vdc, has wireless 802.11b/g and by using my Verizon UML290 on one of the USB ports, it could act as a portable hotspot/unix host. The SD card gives me plenty of room to install Asterisk so being this close already, I decided to give the allstar node a try. I realize that the WRT54GL is at or slightly below the minimum hardware requirements, but it might be just enough to work as a simplex node so here is where I’m at….. 16 Megs of RAM Openwrt Backfire 10.03.1, r29592 2 Gig SD Card ext3 mounted as rootfs 2 Serial ports – 1 for console and the other for GPS 2 USB v1.1 ports – Yeah I know….just maybe though UML290 3g/4g model on 1 USB port - working URIx on the other USB - recognized as sound card Separate 1500 mw regulated 5vdc supply for the MAX 233 ttl to Serial and USB ports Wouxun KG-UV3D - via a URI cable for testing - not tested yet I have the Openwrt buildroot environment setup on another Linux box (Fedora 16 VM)so I can build images and cross compile packages that will run on the Broadcom Chipset. I have the tonezone module compiled and running already but I am still working to get the zaptel kernel module to compile cleanly and then I can work on app_rpt (The Openwrt Astreisk distro doesn't have it). I noticed that the svn code for ACID Linux (Thanks Alan for pointing me in that direction) is optimized for uClibc and so is Openwrt. I’ll see if I can add that as a custom feed and compile it under the buildroot. I’m pretty rusty at this, but it is starting to slowly come back. I know this sounds insane, but I’m having a whole lot of fun with my insanity Any pointers will be greatly appreciated!!! Thanks, Rich – KJ6NMY 73’s -----Original Message----- From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of app_rpt-users-request@ohnosec.org Sent: Wednesday, October 17, 2012 9:00 AM To: app_rpt-users@ohnosec.org Subject: App_rpt-users Digest, Vol 44, Issue 33 Send App_rpt-users mailing list submissions to app_rpt-users@ohnosec.org To subscribe or unsubscribe via the World Wide Web, visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request@ohnosec.org You can reach the person managing the list at app_rpt-users-owner@ohnosec.org When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..." Today's Topics: 1. Re: App_rpt-users Digest, Vol 44, Issue 32 (Bradley Haney) ---------------------------------------------------------------------- Message: 1 Date: Wed, 17 Oct 2012 10:31:48 -0500 From: Bradley Haney <kc9gqr@gmail.com> To: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] App_rpt-users Digest, Vol 44, Issue 32 Message-ID: <CAPg-ThQ+847_hyUbKpRRw4=bW=jM_P6hgHydJwwQ3kLJ1+h5Eg@mail.gmail.com> Content-Type: text/plain; charset=ISO-8859-1 If anyone is using a Zxeyl DSL modem don't use the routing functions.. Bridge it and use a different router.. I had the same problem and swapped several modems out from the DSL company and still same out come. Once i bridged the modem and put a router in line it works 24/7 with no problem.. On Wed, Oct 17, 2012 at 9:15 AM, <app_rpt-users-request@ohnosec.org> wrote:
Send App_rpt-users mailing list submissions to app_rpt-users@ohnosec.org
To subscribe or unsubscribe via the World Wide Web, visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request@ohnosec.org
You can reach the person managing the list at app_rpt-users-owner@ohnosec.org
When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..."
Today's Topics:
1. Cant connect one more time! (Jim W7RY) 2. Re: Cant connect one more time! (Jim W7RY) 3. app_rpt svn (Richard Gilman) 4. Re: app_rpt svn (Jim Duuuude)
----------------------------------------------------------------------
Message: 1 Date: Tue, 16 Oct 2012 21:01:22 -0700 From: "Jim W7RY" <w7ry@centurytel.net> To: <app_rpt-users@ohnosec.org> Subject: [App_rpt-users] Cant connect one more time! Message-ID: <7340A5C3255A497A9FE45D156646031E@JimsLaptop> Content-Type: text/plain; charset="utf-8"
Why cant I connect? I?m about ready to just shut it off... I don?t need the headache!
Jim W7RY
w7ry*CLI> iax2 show registry Host dnsmgr Username Perceived Refresh State 67.215.233.178:4569 N 28238 76.9.248.101:4569 60 Registered w7ry*CLI> rpt fun 28238 *32560 -- Call accepted by 208.70.77.197 (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-643' -- Hungup 'Zap/pseudo-1681955686' -- Hungup 'Zap/pseudo-740754801' -- <Zap/pseudo-662374073> Playing 'rpt/node' (language 'en') -- <Zap/pseudo-662374073> Playing 'digits/2' (language 'en') -- <Zap/pseudo-662374073> Playing 'digits/5' (language 'en') -- <Zap/pseudo-662374073> Playing 'digits/6' (language 'en') -- <Zap/pseudo-662374073> Playing 'digits/0' (language 'en') -- <Zap/pseudo-662374073> Playing 'rpt/connection_failed' (language 'en') -- Hungup 'Zap/pseudo-662374073' w7ry*CLI> w7ry*CLI> iax2 show registry -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20121016/9feab 30f/attachment-0001.html>
------------------------------
Message: 2 Date: Tue, 16 Oct 2012 21:14:34 -0700 From: "Jim W7RY" <w7ry@centurytel.net> To: <app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] Cant connect one more time! Message-ID: <9EC1A048D3A2457284667E18BC100DE3@JimsLaptop> Content-Type: text/plain; charset="utf-8"
Had to reboot to get it to connect which I have to do frequently.
All of you ?I haven't rebooted my node for 2 years? folks care to weigh in as to why I have to reboot to get it to connect?
73 Jim W7RY
From: Jim W7RY Sent: Tuesday, October 16, 2012 9:01 PM To: app_rpt-users@ohnosec.org Subject: [App_rpt-users] Cant connect one more time!
Why cant I connect? I?m about ready to just shut it off... I don?t need the headache!
Jim W7RY
w7ry*CLI> iax2 show registry Host dnsmgr Username Perceived Refresh State 67.215.233.178:4569 N 28238 76.9.248.101:4569 60 Registered w7ry*CLI> rpt fun 28238 *32560 -- Call accepted by 208.70.77.197 (format ulaw) -- Format for call is ulaw -- Hungup 'IAX2/208.70.77.197:4569-643' -- Hungup 'Zap/pseudo-1681955686' -- Hungup 'Zap/pseudo-740754801' -- <Zap/pseudo-662374073> Playing 'rpt/node' (language 'en') -- <Zap/pseudo-662374073> Playing 'digits/2' (language 'en') -- <Zap/pseudo-662374073> Playing 'digits/5' (language 'en') -- <Zap/pseudo-662374073> Playing 'digits/6' (language 'en') -- <Zap/pseudo-662374073> Playing 'digits/0' (language 'en') -- <Zap/pseudo-662374073> Playing 'rpt/connection_failed' (language 'en') -- Hungup 'Zap/pseudo-662374073' w7ry*CLI> w7ry*CLI> iax2 show registry
---------------------------------------------------------------------- ---------- _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20121016/d03cd 8c2/attachment-0001.html>
------------------------------
Message: 3 Date: Wed, 17 Oct 2012 07:07:30 -0700 From: "Richard Gilman" <rgilman@myndzi.com> To: <app_rpt-users@ohnosec.org> Subject: [App_rpt-users] app_rpt svn Message-ID: <35bb01cdac70$bf8b1450$3ea13cf0$@com> Content-Type: text/plain; charset="us-ascii"
Hi All,
First, I'd like to apologize in advance for being a nooby here, but I guess we all start out that way :-)
My question is...where can I find the latest version of app_rpt from svn? The link on the "Manual Configure Support Page" is not working and I'm not finding much via web searches.
I need to cross compile it to run on an embedded system project I am working on.
Thanks,
Rich - KJ6NMY 73's
-----Original Message----- From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of app_rpt-users-request@ohnosec.org Sent: Monday, October 15, 2012 9:00 AM To: app_rpt-users@ohnosec.org Subject: App_rpt-users Digest, Vol 44, Issue 31
Send App_rpt-users mailing list submissions to app_rpt-users@ohnosec.org
To subscribe or unsubscribe via the World Wide Web, visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request@ohnosec.org
You can reach the person managing the list at app_rpt-users-owner@ohnosec.org
When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..."
Today's Topics:
1. +++ RTCM and digital Transceiver +++ (kbaumann) 2. Re: Alternate IAX port >> bind port not working - the fix (Jon Rorke)
----------------------------------------------------------------------
Message: 1 Date: Sun, 14 Oct 2012 19:40:00 +0200 From: "kbaumann" <kbaumann@chello.at> To: <app_rpt-users@ohnosec.org> Subject: [App_rpt-users] +++ RTCM and digital Transceiver +++ Message-ID: <000501cdaa32$ef837930$ce8a6b90$@at> Content-Type: text/plain; charset="us-ascii"
Hi,
Because my first RTCM works perfect with our local Fm Repeater i would like to connect a Motorola Tetra mobile with the second RTCM.
The problem is: there is no COR Signal and also there is no discriminator noise (only ready to go audio) to adjust the Squelch. Is there a solution to bring them together?
The SQL is not adjustable - JP1 ON or OFF gives no solution.
Thank you
Kurt
OE1KBC
-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20121014/e0b17 c64/at tachment-0001.html>
------------------------------
Message: 2 Date: Mon, 15 Oct 2012 10:03:11 -0400 From: Jon Rorke <jrorke@cogeco.ca> Cc: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Alternate IAX port >> bind port not working - the fix Message-ID: <507C179F.3050307@cogeco.ca> Content-Type: text/plain; charset="iso-8859-1"; Format="flowed"
OK I now have it working for me. The bindport in IAX.conf needed to be changed to 4570 and then server info on the Allstar portal also needed to be changed.
Thanks to Brian for the missing piece of info. The last time I had to do this was when there was no portal config.
Jon VA3RQ
have you changed the port you use AT the portal? ie the server configuration, network configuration tab?
if you have a node that needs to be on a different port, the underlying server needs to be moved both at the end, as well as at the mother ship.
had the same problem until i had everything lined up.
-- Bryan Sent from my iPhone 5 please forgive misspellings...
On 10/12/2012 11:31 AM, George Csahanin wrote:
On my node 28599 here's where I had to make mods to reflect using port 4570: root@nat:/etc/asterisk <mailto:root@nat:/etc/asterisk># grep 4570 * iax.conf:bindport=4570 iax_rpt_custom.conf:bindport=4570 root@nat:/etc/asterisk <mailto:root@nat:/etc/asterisk># There are no ports indicated in rpt.conf. It all works fine, others can connect, and webtransceiver works fine. I also do not use portal configuration as it won't let me ser CW ID at 30 WPM GeorgeC
----- Original Message ----- *From:* Robert Poff <mailto:wb3awj@comcast.net> *To:* app_rpt-users@ohnosec.org <mailto:app_rpt-users@ohnosec.org> *Sent:* Friday, October 12, 2012 8:32 AM *Subject:* Re: [App_rpt-users] Alternate IAX port >> bind port not working
Just for drill... if you move into /etc/asterisk and do "fgrep 4569 *" and "fgrep 4570 *". What do get back?
Here's what I see with my alternate port 4565 (on XIPAR) : iax_general_custom.conf:bindport=4565 rpt.conf:28695 = radio@127.0.0.1 <mailto:radio@127.0.0.1>:4565/28695,NONE ;KVHF 10m Receiver - ME rpt.conf:12958 = radio@209.213.169.196 <mailto:radio@209.213.169.196>:4565/12958,NONE ;KVHF 10m Transmitter
-- /Robert A. Poff/ /Loganville, PA/
*/S/V Loon <http://wb3awj.hobby-site.org/loon.htm>/* /1983 Hunter 34/ /Havre de Grace, MD./
WB3AWJ/- Allstar 27784/ /Powered by Linux/
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20121015/da092 329/at tachment-0001.html>
------------------------------
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
End of App_rpt-users Digest, Vol 44, Issue 31 *********************************************
------------------------------
Message: 4 Date: Wed, 17 Oct 2012 07:15:09 -0700 From: Jim Duuuude <telesistant@hotmail.com> To: <rgilman@myndzi.com>, app_rpt mailing list <app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] app_rpt svn Message-ID: <BLU155-W4B2AD3EFCF62D107701E9B1770@phx.gbl> Content-Type: text/plain; charset="iso-8859-1"
Youre right.. svn.ohnosec.org seems to be poo-ped at the moment.. Ill send a message to the ohnosec.org dude and see what is going on.
From: rgilman@myndzi.com To: app_rpt-users@ohnosec.org Date: Wed, 17 Oct 2012 07:07:30 -0700 Subject: [App_rpt-users] app_rpt svn
Hi All,
First, I'd like to apologize in advance for being a nooby here, but I guess we all start out that way :-)
My question is...where can I find the latest version of app_rpt from svn? The link on the "Manual Configure Support Page" is not working and I'm not finding much via web searches.
I need to cross compile it to run on an embedded system project I am working on.
Thanks,
Rich - KJ6NMY 73's
-----Original Message----- From: app_rpt-users-bounces@ohnosec.org [mailto:app_rpt-users-bounces@ohnosec.org] On Behalf Of app_rpt-users-request@ohnosec.org Sent: Monday, October 15, 2012 9:00 AM To: app_rpt-users@ohnosec.org Subject: App_rpt-users Digest, Vol 44, Issue 31
Send App_rpt-users mailing list submissions to app_rpt-users@ohnosec.org
To subscribe or unsubscribe via the World Wide Web, visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request@ohnosec.org
You can reach the person managing the list at app_rpt-users-owner@ohnosec.org
When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..."
Today's Topics:
1. +++ RTCM and digital Transceiver +++ (kbaumann) 2. Re: Alternate IAX port >> bind port not working - the fix (Jon Rorke)
--------------------------------------------------------------------- -
Message: 1 Date: Sun, 14 Oct 2012 19:40:00 +0200 From: "kbaumann" <kbaumann@chello.at> To: <app_rpt-users@ohnosec.org> Subject: [App_rpt-users] +++ RTCM and digital Transceiver +++ Message-ID: <000501cdaa32$ef837930$ce8a6b90$@at> Content-Type: text/plain; charset="us-ascii"
Hi,
Because my first RTCM works perfect with our local Fm Repeater i would like to connect a Motorola Tetra mobile with the second RTCM.
The problem is: there is no COR Signal and also there is no discriminator noise (only ready to go audio) to adjust the Squelch. Is there a solution to bring them together?
The SQL is not adjustable - JP1 ON or OFF gives no solution.
Thank you
Kurt
OE1KBC
-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20121014/e0b1 7c64/at tachment-0001.html>
------------------------------
Message: 2 Date: Mon, 15 Oct 2012 10:03:11 -0400 From: Jon Rorke <jrorke@cogeco.ca> Cc: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Alternate IAX port >> bind port not working - the fix Message-ID: <507C179F.3050307@cogeco.ca> Content-Type: text/plain; charset="iso-8859-1"; Format="flowed"
OK I now have it working for me. The bindport in IAX.conf needed to be changed to 4570 and then server info on the Allstar portal also needed to be changed.
Thanks to Brian for the missing piece of info. The last time I had to do this was when there was no portal config.
Jon VA3RQ
have you changed the port you use AT the portal? ie the server configuration, network configuration tab?
if you have a node that needs to be on a different port, the underlying server needs to be moved both at the end, as well as at the mother ship.
had the same problem until i had everything lined up.
-- Bryan Sent from my iPhone 5 please forgive misspellings...
On 10/12/2012 11:31 AM, George Csahanin wrote:
On my node 28599 here's where I had to make mods to reflect using port 4570: root@nat:/etc/asterisk <mailto:root@nat:/etc/asterisk># grep 4570 * iax.conf:bindport=4570 iax_rpt_custom.conf:bindport=4570 root@nat:/etc/asterisk <mailto:root@nat:/etc/asterisk># There are no ports indicated in rpt.conf. It all works fine, others can connect, and webtransceiver works fine. I also do not use portal configuration as it won't let me ser CW ID at 30 WPM GeorgeC
----- Original Message ----- *From:* Robert Poff <mailto:wb3awj@comcast.net> *To:* app_rpt-users@ohnosec.org <mailto:app_rpt-users@ohnosec.org> *Sent:* Friday, October 12, 2012 8:32 AM *Subject:* Re: [App_rpt-users] Alternate IAX port >> bind port not working
Just for drill... if you move into /etc/asterisk and do "fgrep 4569 *" and "fgrep 4570 *". What do get back?
Here's what I see with my alternate port 4565 (on XIPAR) : iax_general_custom.conf:bindport=4565 rpt.conf:28695 = radio@127.0.0.1 <mailto:radio@127.0.0.1>:4565/28695,NONE ;KVHF 10m Receiver - ME rpt.conf:12958 = radio@209.213.169.196 <mailto:radio@209.213.169.196>:4565/12958,NONE ;KVHF 10m Transmitter
-- /Robert A. Poff/ /Loganville, PA/
*/S/V Loon <http://wb3awj.hobby-site.org/loon.htm>/* /1983 Hunter 34/ /Havre de Grace, MD./
WB3AWJ/- Allstar 27784/ /Powered by Linux/
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20121015/da09 2329/at tachment-0001.html>
------------------------------
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
End of App_rpt-users Digest, Vol 44, Issue 31 *********************************************
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-------------- next part -------------- An HTML attachment was scrubbed... URL: <http://ohnosec.org/pipermail/app_rpt-users/attachments/20121017/8ff2a 6ed/attachment.html>
------------------------------
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
End of App_rpt-users Digest, Vol 44, Issue 32 *********************************************
------------------------------ _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users End of App_rpt-users Digest, Vol 44, Issue 33 *********************************************