Hi Joe, I can answer part of that for you. You do need a GPS with NMEA or TSIP. The RTCM needs to know the time so it can time stamp the UDP packets when sending them to the server. If you go to http://svn.ohnosec.org/viewvc/projects/allstar/voter/?root=svn and look at the VOTER Protocol.pdf and the votersystem.pdf, and look at the protocol parts, you may answer some of your questions. I know the required NMEA sentences are out there somewhere, but I don't recall where I saw them. You can adjust the launch delay on each RTCM, but I do not believe it does any sort of auto adjust. Lee On Sat, Jun 4, 2016 at 6:03 PM, Joe Moskalski <kc2irv@gmail.com> wrote:
I will be setting up a 2 site UHF simulcast system in the coming months and so far I have only one question to ask. The RTCM manual is a little vague on the GPS part of the setup. Normally, with other types of radio simulcast products (which I am very familiar with several) all you need to properly time the audio is a 1 pps signal from the GPS reference. The RTCM manual makes mention of the NMEA/TSIP data being connected but does not explicitly say if that serial data is needed or if only the 1 pps is needed for simulcast operation. From the other simulcast products I have worked with, you set your bulk delay to a value larger then the delay required for the furthest site and the system will adjust. Does the RTCM version of simulcast work the same way? I just want to be sure because this will determine what type of GPS locked reference oscillator I choose for the project.
Regards, KC2IRV -Joe
<https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=icon> Virus-free. www.avast.com <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=webmail&utm_term=link> <#m_1588706114853180551_DDB4FAA8-2DD7-40BB-A1B8-4E2AA1F9FDF2>
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Lee Woldanski, AScT VE7FET