Hi, You should strive for better timing numbers for serious use. AllStar uses the dahdi bridge/conference software as the mechanism to mix all the received audio for a given node into the combined transmit audio....Every time that you link nodes together, you're dynamically creating a dahdi multi-party bridge, which is similar to an Asterisk conference call "underneath the covers." The software timing must be spot-on to accomplish this task without glitches. Here may be a couple links of interest: https://community.freepbx.org/t/this-is-scaring-the-hell-out-of-me/11389 https://wiki.asterisk.org/wiki/display/AST/Bridges 73, David KB4FXC On Tue, 28 Nov 2017, Benjamin Naber wrote:
David,
you message was put in my "Worthy Keeping" folder! While on this subject, are there any other tests? These were the results of: dahdi_test -c 100 me@KB9LFZ-2:~# dahdi_test -c 100 Opened pseudo dahdi interface, measuring accuracy... 99.999% 99.997% 99.609% 99.997% 99.998% 99.615% 99.995% 99.608%Â 99.999% 99.615% 99.608% 99.613% 99.608% 99.999% 99.994% 99.970%Â 99.645% 99.998% 99.608% 99.998% 99.996% 99.996% 99.998% 99.996%Â 99.998% 99.996% 99.999% 99.615% 99.611% 99.613% 99.995% 99.608%Â 99.997% 99.612% 99.608% 99.614% 99.608% 99.615% 99.997% 100.000%Â 99.605% 99.612% 99.989% 99.976% 99.957% 99.998% 99.996% 99.997%Â 100.000% 99.993% 99.998% 99.997% 99.999% 99.997% 99.997% 99.997%Â 99.997% 99.998% 99.998% 99.996% 99.999% 99.993% 99.999% 99.999%Â 99.993% 99.998% 99.998% 99.998% 99.997% 99.994% 99.999% 99.997%Â 99.999% 99.998% 99.993% 100.000% 99.997% 100.000% 99.996% 99.997%Â 99.998% 99.995% 99.998% 99.999% 99.992% 99.999% 99.997% 99.998%Â 99.998% 99.996% 99.997% 99.999% 99.996% 99.999% 99.996% 99.997%Â 99.997% 99.995%Â --- Results after 98 passes --- Best: 100.000% -- Worst: 99.605% -- Average: 99.917708% Cummulative Accuracy (not per pass): 99.997 What is interesting about this mess is that Windows 10 does not do very well on this enviroment... while the Linux machines just seem to work as if the OS was installed on real hardware ~Benjamin, KB9LFZ On Mon, 2017-11-27 at 22:07 -0500, David McGough wrote:
To REALLY tell how well any environment is working, you need to check the timing quality as reported from the dahdi kernel drivers. Many environments (particularly VPS!) do rather poorly in the area. Poor results typically mean audio choppiness and poor telemetry timing (e.g.:Â Â Bad CW or tone timing), particularly where the server is used as a hub with many users connecting, needing to mix many audio streams. Note that this is an asterisk thing, not specifically AllStar. Many messages have been written about this in other asterisk related forums; goog'ling will find many results.
To test the timing quality, use the dahdi_test command. Jitter in the timing results and accuracy less than about 99.8% means less than perfect performance and potentially mediocre results.
Here is a sample run from my dev RPi3 system with 3 nodes (2 usb audio, 1Â pseudo) active:
[root@alarmpi-kb4fxc asterisk]# dahdi_test -c 100 Opened pseudo dahdi interface, measuring accuracy... 99.992% 99.990% 99.994% 99.994% 99.995% 99.996% 99.994% 99.994%Â 99.995% 99.993% 99.996% 99.994% 99.994% 99.994% 99.995% 99.996%Â 99.993% 99.993% 99.994% 99.995% 99.995% 99.994% 99.994% 99.994%Â 99.994% 99.995% 99.993% 99.994% 99.994% 99.994% 99.995% 99.993%Â 99.994% 99.993% 99.994% 99.995% 99.993% 99.994% 99.994% 99.994%Â 99.996% 99.993% 99.994% 99.994% 99.995% 99.996% 99.994% 99.994%Â 99.994% 99.994% 99.996% 99.994% 99.994% 99.993% 99.994% 99.995%Â 99.995% 99.993% 99.994% 99.995% 99.995% 99.995% 99.994% 99.994%Â 99.994% 99.994% 99.994% 99.994% 99.994% 99.995% 99.995% 99.994%Â 99.994% 99.993% 99.994% 99.996% 99.993% 99.995% 99.994% 99.995%Â 99.996% 99.993% 99.994% 99.994% 99.995% 99.996% 99.994% 99.994%Â 99.994% 99.994% 99.996% 99.994% 99.994% 99.995% 99.994% 99.996%Â 99.994% 99.993%Â --- Results after 98 passes --- Best: 99.996% -- Worst: 99.990% -- Average: 99.994247% Cummulative Accuracy (not per pass): 99.994
73, David KB4FXC
On Mon, 27 Nov 2017, Benjamin Naber wrote:
For those of you who are into this sort of thing, DIAL 8.5 has been
installed, conbooberated and running successfully with no apparent lag, on the latest stable version of Proxmox. Currently, it is a radio- less node.
The test environment is a cluster of three Dell R310 servers (nodes), each with 16GB+ RAM, RAID 1 system drives, some other volume drives, 10GB fiber storage network links, and 1GB network connections.
Each of three nodes have other VMs running on them, running stuff like BIONIC, and other silly things for 'stress' testing, as the system is being evaluated for production environment.
To my understanding, proxmox is not a load-sharing/proxy/cloud computing network, each VM is hosted/homed on a single node, but has "live" versions on the other nodes in the cluster. Should a node suffer both power supply failures, or CPU fan squeals to a stop, or the RAID controller dies, within a minute or so, another node will spin up the live versions of the VMs that were on the now dead node.
So far, that has not been any noticeable lag, jitters, delay, otherwise anything negative, much to my surprise. This is a 101 for me on VM stuff, never messed with it until now.
If anyone wants to assist in testing, you are invited to connect to 29567 Tuesday night, 7PM Central/8PM Eastern for our weekly Allstar Technical Net.
I am calling the net tomorrow night, to which the topics are advanced ASL node configurations, and some other stuff I have to be reminded of.
There is chatter throughout the days, more-so at night, so anyone is welcome to connect anytime!
Don't be a square, connect to there!
~Benjamin, KB9LFZ
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.o rg/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.Â
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.o rg/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.Â
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.