No it's a P4 3.0g with 1G ram. One of those IBM TigerDirect refurbs for 99 bucks! I have had great luck with these in the past, but maybe this one is FUBAR. --Steve On 11/18/2012 09:16, Corey Dean wrote:
This wouldn't happen to be an AMD processor would it?
Corey N3FE On Nov 18, 2012, at 8:46 AM, "Steve Schulze" <n9udo@yellowthunder.org> wrote:
It's not the URI. Same issue. Tried different USB ports,same results. Sometimes it take only 5 minutes to freeze, sometimes takes 12 hours. Strange.....
Might have to send this PC back.
--Steve
On 11/17/2012 13:49, Steve Schulze wrote:
I ran memtest for a little more than 5 hours, a solid 10 passes and no errors.
I'm now trying a different URI to see if that's the issue.
--Steve
On 11/16/2012 12:32, Don Hackler wrote:
Download and run memtest86+ from http://www.memtest.org/ You can boot it from a floppy or a USB stick.
It will help you locate subtle memory problems fairly quickly. I use it every time I build a machine now.
If it runs a few hours without errors, you know your machine is pretty solid.
On Nov 16, 2012, at 4:50 AM, Steve Schulze <n9udo@yellowthunder.org> wrote:
Yeah, that's what I'm thinking too. Right now doing memory stick swaps to see if that's it. On round 2!
Amateur Radio - The Original Social Media
Steve Schulze - Radio Amateur, General Class - N9UDO Administrator, Baraboo, Wisconsin D-Star System - WB9FDZ Administrator, Baraboo, Wisconsin AllStarLink Systems - 27616, 27727 Treasurer, Badgerland Amateur Television Society - KB9SFS
http://yellowthunder.org/dstar.html
On 11/15/2012 13:23, Tim Sawyer wrote:
I'd bet it's your hardware, maybe RAM. It's pretty unlikely Asterisk would totally lock up your machine. -- Tim :wq
On Nov 15, 2012, at 5:27 AM, Steve Schulze <n9udo@yellowthunder.org> wrote:
> I had recently moved node 27727 to a new box using the latest full > install of ACID. > > I'm now seeing random freezing of Asterisk, or one of it's > components, as the node just stops responding. Sometime the node > will run for several hours, longest run was almost 12 hours, I > have seen it as short as 1 or 2 hours. When this occurs, I cannot > reboot the machine from the prompt. When I attempt, the PC speaker > just squeals until I force the power off. > > Below is a capture of what usually occurs when the node freezes. > > > [KWB9FDZ*CLI> > [Nov 14 17:31:03] ERROR[2364]: chan_usbradio.c:2599 usbradio_read: > HID process has died or something!! > > [KWB9FDZ*CLI> > -- Hungup 'Zap/pseudo-1321073272' > -- Hungup 'Zap/pseudo-1923931712' > -- Hungup 'Zap/pseudo-471354119' > -- Hungup 'Zap/pseudo-1974549115' > -- Hungup 'Zap/pseudo-938459000' > -- Hungup 'Zap/pseudo-360012123' > [Nov 14 17:33:08] WARNING[2361]: app_rpt.c:21836 rpt_master: > rpt_thread restarted on node 27727 > > [KWB9FDZ*CLI> > -- Re-Loading config for repeater 27727 > > [KWB9FDZ*CLI> > -- rpt (Rx) initiating call to Radio/usb27727 on Radio/usb27727 > > [KWB9FDZ*CLI> > [Nov 14 17:33:12] ERROR[5383]: chan_usbradio.c:2599 usbradio_read: > HID process has died or something!! > > [KWB9FDZ*CLI> > -- Hungup 'Zap/pseudo-1356185696' > -- Hungup 'Zap/pseudo-1200975276' > -- Hungup 'Zap/pseudo-1694965886' > -- Hungup 'Zap/pseudo-1185873296' > -- Hungup 'Zap/pseudo-353324112' > -- Hungup 'Zap/pseudo-956752671' > == Set device 4-1 to usb27727 > [Nov 14 17:33:40] WARNING[5384]: chan_usbradio.c:1700 hidthread: > Loaded parameters from usbradio_tune_usb27727.conf for device > usb27727 . > > [KWB9FDZ*CLI> > [Nov 14 17:35:49] WARNING[2361]: app_rpt.c:21836 rpt_master: > rpt_thread restarted on node 27727 > -- Re-Loading config for repeater 27727 > -- rpt (Rx) initiating call to Radio/usb27727 on Radio/usb27727 > [Nov 14 17:35:49] WARNING[5399]: chan_usbradio.c:2674 > usbradio_read: Possibly stuck USB read channel. [usb27727] > [Nov 14 17:35:53] ERROR[5399]: chan_usbradio.c:2599 > usbradio_read: HID process has died or something!! > > [KWB9FDZ*CLI> > -- Hungup 'Zap/pseudo-1234779841' > -- Hungup 'Zap/pseudo-823024661' > -- Hungup 'Zap/pseudo-128844783' > -- Hungup 'Zap/pseudo-1477433026' > -- Hungup 'Zap/pseudo-47743459' > == Set device 4-1 to usb27727 > [Nov 14 17:36:22] WARNING[5400]: chan_usbradio.c:1700 hidthread: > Loaded parameters from usbradio_tune_usb27727.conf for device > usb27727 . > -- Hungup 'Zap/pseudo-358092408' > [Nov 14 17:37:59] WARNING[2361]: app_rpt.c:21836 > rpt_master: rpt_thread restarted on node 27727 > -- Re-Loading config for repeater 27727 > -- rpt (Rx) initiating call to Radio/usb27727 on Radio/usb27727 > [Nov 14 17:38:03] ERROR[5415]: chan_usbradio.c:2599 > usbradio_read: HID process has died or something!! > > [KWB9FDZ*CLI> > -- Hungup 'Zap/pseudo-959192474' > -- Hungup 'Zap/pseudo-119995292' > -- Hungup 'Zap/pseudo-910823610' > -- Hungup 'Zap/pseudo-1271419211' > -- Hungup 'Zap/pseudo-1514445782' > -- Hungup 'Zap/pseudo-1885015791' > == Set device 4-1 to usb27727 > [Nov 14 17:38:31] WARNING[5416]: chan_usbradio.c:1700 > hidthread: Loaded parameters from usbradio_tune_usb27727.conf for > device usb27727 . > > [KWB9FDZ*CLI> > [Nov 14 17:40:08] WARNING[2361]: app_rpt.c:21836 rpt_master: > rpt_thread restarted on node 27727 > > [KWB9FDZ*CLI> > -- Re-Loading config for repeater 27727 > > [KWB9FDZ*CLI> > -- rpt (Rx) initiating call to Radio/usb27727 on Radio/usb27727 > > [KWB9FDZ*CLI> > [Nov 14 17:40:12] ERROR[5431]: chan_usbradio.c:2599 usbradio_read: > HID process has died or something!! > > [KWB9FDZ*CLI> > -- Hungup 'Zap/pseudo-123945640' > -- Hungup 'Zap/pseudo-1914243603' > -- Hungup 'Zap/pseudo-1904931772' > -- Hungup 'Zap/pseudo-1252634755' > -- Hungup 'Zap/pseudo-1804246462' > -- Hungup 'Zap/pseudo-569032085' > == Set device 4-1 to usb27727 > [Nov 14 17:40:40] WARNING[5432]: chan_usbradio.c:1700 hidthread: > Loaded parameters from usbradio_tune_usb27727.conf for device > usb27727 . > > [KWB9FDZ*CLI> > [Nov 14 17:42:17] WARNING[2361]: app_rpt.c:21836 rpt_master: > rpt_thread restarted on node 27727 > > [KWB9FDZ*CLI> > -- Re-Loading config for repeater 27727 > > [KWB9FDZ*CLI> > -- rpt (Rx) initiating call to Radio/usb27727 on Radio/usb27727 > > [KWB9FDZ*CLI> > [Nov 14 17:42:21] ERROR[5456]: chan_usbradio.c:2599 usbradio_read: > HID process has died or something!! > > [KWB9FDZ*CLI> > -- Hungup 'Zap/pseudo-1625376915' > -- Hungup 'Zap/pseudo-1332043632' > -- Hungup 'Zap/pseudo-1082279744' > -- Hungup 'Zap/pseudo-1304564785' > -- Hungup 'Zap/pseudo-976351035' > -- Hungup 'Zap/pseudo-2003986033' > == Set device 4-1 to usb27727 > [Nov 14 17:42:49] WARNING[5457]: chan_usbradio.c:1700 hidthread: > Loaded parameters from usbradio_tune_usb27727.conf for device > usb27727 . > > [KWB9FDZ*CLI> > [Nov 14 17:44:26] WARNING[2361]: app_rpt.c:21836 rpt_master: > rpt_thread restarted on node 27727 > > [KWB9FDZ*CLI> > -- Re-Loading config for repeater 27727 > > [KWB9FDZ*CLI> > -- rpt (Rx) initiating call to Radio/usb27727 on Radio/usb27727 > > [KWB9FDZ*CLI> > [Nov 14 17:44:30] ERROR[5481]: chan_usbradio.c:2599 usbradio_read: > HID process has died or something!! > > [KWB9FDZ*CLI> > -- Hungup 'Zap/pseudo-562695817' > -- Hungup 'Zap/pseudo-41485895' > -- Hungup 'Zap/pseudo-674125634' > -- Hungup 'Zap/pseudo-1681055800' > -- Hungup 'Zap/pseudo-1172360100' > -- Hungup 'Zap/pseudo-2074122207' > == Set device 4-1 to usb27727 > [Nov 14 17:44:59] WARNING[5483]: chan_usbradio.c:1700 hidthread: > Loaded parameters from usbradio_tune_usb27727.conf for device > usb27727 . > > [KWB9FDZ*CLI> > [Nov 14 17:46:36] WARNING[2361]: app_rpt.c:21836 rpt_master: > rpt_thread restarted on node 27727 > > [KWB9FDZ*CLI> > -- Re-Loading config for repeater 27727 > > [KWB9FDZ*CLI> > -- rpt (Rx) initiating call to Radio/usb27727 on Radio/usb27727 > > [KWB9FDZ*CLI> > [Nov 14 17:46:40] ERROR[5506]: chan_usbradio.c:2599 usbradio_read: > HID process has died or something!! > > [KWB9FDZ*CLI> > -- Hungup 'Zap/pseudo-81739412' > -- Hungup 'Zap/pseudo-933811143' > -- Hungup 'Zap/pseudo-1900592699' > -- Hungup 'Zap/pseudo-873450041' > -- Hungup 'Zap/pseudo-1455015117' > -- Hungup 'Zap/pseudo-1502090246' > == Set device 4-1 to usb27727 > [Nov 14 17:47:07] WARNING[5507]: chan_usbradio.c:1700 hidthread: > Loaded parameters from usbradio_tune_usb27727.conf for device > usb27727 . > > > The system just keep spewing this string every couple of minutes. > > > Anybody run across this or have any thoughts what might be causing > it. > > > > Thank you for your time. > > -- > Amateur Radio - The Original Social Media > > Steve Schulze - Radio Amateur, General Class - N9UDO > Administrator, Baraboo, Wisconsin D-Star System - WB9FDZ > Administrator, Baraboo, Wisconsin AllStarLink Systems - 27616, 27727 > Treasurer, Badgerland Amateur Television Society - KB9SFS > > http://yellowthunder.org/dstar.html > > _______________________________________________ > App_rpt-users mailing list > App_rpt-users@ohnosec.org > http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
-- This message was scanned and is believed to be clean. Click here to report this message as spam. http://simba.repeater.net/cgi-bin/learn-msg.cgi?id=1CD81221F.A993F