I think the questing is can a URI just by itself be used for a repeater controller. The answer is no. You need a computer too. 73 Jim W7RY On 11/10/2013 3:55 PM, Tim Sawyer wrote:
First a couple of definitions: - Allstar is a public network of nodes. - A node is an endpoint on the public Allstar network, on a private network, or on no network at all. - App_rpt is an application (running on Asterisk the open source PBX) which is a complete repeater and remote base controller.
Yes, the URI and app_rpt can make a standalone repeater. You do need a node number BUT it can be private which means it will have no network access from Allstar. Just assign yourself a 4 digit node number under 2000.
Remote bases are a bit more complex. Get your repeater running first and then tackle a remote base. When you’re ready start here… http://ohnosec.org/drupal/node/191
-- Tim :wq
On Nov 10, 2013, at 3:12 PM, Richard Szajkowski <va3rzs@gmail.com> wrote:
Hello to the group
I am rebuilding my 220 repeater , can I use the uri and allstar as a stand alone repeater controller ?
I don't want any links at this time to the 220 repeater , maybe down the road I will link the VHF to the 220
So do I need a node number ?
I have read about the remote base , and how to do that
Thanks
Richard Szajkowski
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users