it is, I'll have to see if I can't reproduce it and let you know. Thanks for looking at it Jim! Alan From: Jim Duuuude [mailto:telesistant@hotmail.com] Sent: Tuesday, June 05, 2012 10:23 AM To: app_rpt mailing list; adamson_alan@hotmail.com Subject: FW: [App_rpt-users] Quick question on usability I have made good attempt at re-creating this problem, to no avail. I have 2 nodes on a development server. 2007 and 2008. I can do a *22008 on 2007 and then do a *80 on 2007 and it only goes out on 2007. Is that the scenario that you were referring to? JIM _____ Date: Tue, 29 May 2012 13:31:22 -0400 From: jrorke@cogeco.ca CC: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Quick question on usability I have also observed that some ids in monitoring mode do get passed on as if I was connected in transceive mode. I seem to remember that this has been like this for some time. I guess nobody posted it to the bugs page. Jon VE3RQ On 5/29/2012 1:13 PM, Jim Duuuude wrote: No, normally (non-command) initiated ID's are always local. The problem you are (most likely) seeing is that the command (the *80) in this case is getting re-distributed to all connected nodes in the normal manner, even though the link(s) is(are) connected in monitor-only mode. Darn you for finding a design flaw!! :-) I will attempt to verify that locally-initiated commands on a monitor-connected link get distributed. If they do, they wont for long.. :-) JIM _____ From: adamson_alan@hotmail.com To: App_rpt-users@ohnosec.org Date: Tue, 29 May 2012 13:06:25 -0400 Subject: [App_rpt-users] Quick question on usability I don't want to be a bad operator at the moment. As I go about checking bandwidth and jitter, etc on my setup. I'd like to connect to an active Hub, but just in eavesdrop mode. But I've noticed that if I connect with the *2 command, that if I inadvertently then do a *80, that the ID goes out on the link that was connected with the *2. Is this true anytime my node decides to ID? Alan _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users