I haven't made it down to the site yet. Want to be on site in case It doesn't work and I have to use the serial port. On Sat, Dec 2, 2017 at 6:19 PM, Hayden Honeywood <haydenph91@gmail.com> wrote:
Hi Tim,
I haven't noticed any transmitter drops, but I'm sure if would happen.
My switch port is currently set as 10/half. I set it to be the same as the RTCM, which was set in the firmware. Did you find going to full duplex helped?
Hayden
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/ cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- -- Tim