hi all, i know the post is a little bit older but the last days i had some time for testing and playing with my allstarnode. @mike: tnx a lot for your instructions on the page http://themidnightengineer.com/category/ham-amateur-radio/app_rpt/config-set... a call from SIP to repeater runs fine now but i have 2 questions a, you write in your instruction "exten => 29283,n,Rpt,29283|P ; make connection – the P is for phone control mode" are there any other possibilitys for P ? is it possible to connect like the allstarlink telefon portal with VOX PTT ? instead of *99 and # ?? b, how can i call from the repeater to the SIP(i take the 6010 like you of course...) tnx a lot and have a nice weekend 73.... tom dh6mbt ________________________________ Von: app_rpt-users-bounces@ohnosec.org [app_rpt-users-bounces@ohnosec.org] im Auftrag von mike@midnighteng.com [mike@midnighteng.com] Gesendet: Freitag, 20. Dezember 2013 00:00 An: app_rpt-users@ohnosec.org Betreff: Re: [App_rpt-users] Connect SIP Phone to allstarlink box The answer to the one part is -Yes- you can connect to your sip/iax to app_rpt extension on the system. Nothing extra is needed but the sip definition in the system and a compatible sip phone/software on your network. Not to be taken the wrong way, I would think many of us could help you through that but, We have no way of knowing how much you know about the supporting structure, being asterisk pbx. So I would say that you should look-up the support you need from asterisk online manuals on setting up a phone sip extension. Get the manual for asterisk at asterisk.org<http://asterisk.org/> and you might learn about the many capabilities of asterisk why you are at it. When you have a particular problem doing that, ask that particular question. Many are glad to help. Here is my sip extention for my ipad (with sip software) --sip.conf [6010] ;iPad deny=0.0.0.0/0.0.0.0 username=6010 secret=yoursecretpassword dtmfmode=rfc2833 canreinvite=no context=radio-control host=dynamic trustrpid=yes sendrpid=no type=friend nat=no port=5060 qualify=yes qualifyfreq=60 transport=udp encryption=no callgroup= pickupgroup= dial=SIP/6010 That should get you started but get the asterisk manual. Many answers are in there. ...mike/kb8jnm -------- Original Message -------- Subject: [App_rpt-users] Connect SIP Phone to allstarlink box From: "torben@klimt-online.com<mailto:torben@klimt-online.com>" <torben@klimt-online.com<mailto:torben@klimt-online.com>> Date: Thu, December 19, 2013 5:04 pm To: "app_rpt-users@ohnosec.org<mailto:app_rpt-users@ohnosec.org>" <app_rpt-users@ohnosec.org<mailto:app_rpt-users@ohnosec.org>> Hi all, I would like to connect 2-3 SIP Phones to the allstarlink box. Is it possible to call to each other AND to the repeater ? Is there anyone you can help me doing that ? or are there some howto`s ? I think I must write the “User/Clients/Phones” t0 the sip.conf and need some dialplans for calls from sip to sip and from sip to allstarlink-repeater Tnx for the help 73… Torben Klimt Eicherstrasse 58 85123 Karlskron-Grillheim Telefon: 08453-34 45 040 Fax: 08453 - 4085296 Mobil: 0151-178 74499 torben@klimt-online.com<https://exchange.df.eu/owa/redir.aspx?C=a04ffef3e8f44fe88175e5e5127907d7&URL=mailto%3atorben%40klimt-online.com> ________________________________ _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org<mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users