Jeremy, Thanks, I'll give that a try. I was going to try that, but I read in the code something about enforcing a minimum of 600 seconds so I just assumed it wouldn't work. I guess I'll see. Two other questions for the group: 1) Is there an easy way to stop it from saying "to node # # # #" when it announces someone connecting. I have it set to say the callsign, which is sufficient. I don't need to know my node # every time someone connects. 2) Anyone had an issue with it saying the wrong callsigns on EchoLink? KB1PSB connected the other day, and it announced KT0EE. It has done this with a few different call signs, afaik all of them on mobile devices. Thanks, Matt, NM1B On Sun, Oct 24, 2010 at 19:32, "Jeremy R. Geeo [KDØEAV]" <kd0eav@clear-sky.net> wrote:
I believe that's just a matter of setting: idtime=0
At least that's how I've done it in the past...
73
- Jeremy, KD0EAV
Matt Brennan wrote:
Good Day,
I have just installed the ACID build today to get my node online on Echolink and AllStar. I have an issue though where the box that runs Asterisk is interfacing with an SCOM 7330 controller which handles all ID'ing. I have looked through the docs and can't seem to find a place where I can turn off apt_rpt sending a CW ID. Is there any way to turn this off? Our system is set up to drop PL on ID from the controller so it's a bit annoying when the Asterisk install sends ID through the controller.
Thank you, Matt, NM1B _______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@qrvc.com http://qrvc.com/mailman/listinfo/app_rpt-users