Is the remote PL'd Some set-ups just pass PL, some generate/regenerate only when their cos is active. So, if true, you might not hear the tail. Can you try some other repeater ? or TX simplex on that freq with a HT for a test. yes, I am still guessing... LOL... But i do understand better. Except, Are you listening to this only through iaxrpt ? Is iaxrpt connected directly to the remote base node or a normal full duplex node that is then connected to the remote base node ? Send me a copy of your simpleusb/radiousb for the remote ...mike/kb8jnm On 9/2/2018 12:17 AM, Rachel Olivero wrote:
Mike,
I just saw this. SO I'll try and explain it better. I can jump on tomorrow if it'll be easier to talk out.
If I set the TM-D700 and an HT to a simplex frequency, I have no problem. I can transmit from iaxRpt and it keys the radio, sends my voice, and I hear it on the HT. I can reply on the HT and I hear the transmission in the headset connected to iaxRpt.
The trouble comes in when I set the TM-D700 to a repeater frequency. Normally, transmitting with an HT, one would hear the courtesy tone and hang time tail of the repeater. Neither of which I hear if I key a repeater when no COS signal is present. However, if someone else initiates a transmission and I key up, respond, and unkey, I instantly hear the repeater's audio coming from the D700. The best I can figure is that app_rpt is not detecting, or perhaps able to detect, COS immediately after PTT release and it won't detect the COS signal unless it is lost and regained.
Let me know if that makes any more sense.
Thanks, Rachel
On Sat, Sep 1, 2018, at 21:14, Mike wrote:
I'm a bit sorry, since I can't tell which audio you are speaking of in your statement. Makes it confusing. Could mean different things.
There are circumstances that iaxrpt does not get returned audio as it is a direct iax connection. But I can't determine from what you have said exactly the circumstance, so ???
You might connect to 29285 for a quick chat. It's listening to DMR so you can talk over and call me.
...mike/kb8jnm
On 9/1/2018 9:46 PM, Rachel Olivero wrote:
Mike,
Thanks. I can check the COS logic. If it were inverted though, would I be receiving anything? I definitely get signal as long as the carrier is active before I transmit.
I'll check permissions too.
On Sat, Sep 1, 2018, at 20:42, Mike wrote:
While I can't say for sure, it sounds like you have the logic inverted on your cos of the remote base. If I am reading you right.
The archive directory must exist. look for type errors both in your definition in rpt.conf and the actual directory would be the first thing in your checks. archivedir=/var/www/html/somewhere/archive It will only create a director <NODE#> to put the data in if it finds the defined path to do it. Also check ownership and permissions of the directory.
Hope that gets you somewhere.
...mike/kb8jnm
On 9/1/2018 9:12 PM, Rachel Olivero wrote:
Good evening all:
I presently have my TM-D700 connected to a Raspberry Pi with a URI and configured as a remote base. I'm using iaxRpt to control/use it. I'm noticing that if there is received audio and I transmit, everything works fine. When I unkey, I get the repeater audio immediately back over iaxRpt. However, if I transmit to a repeater that has had no carrier previously, I don't hear any returned audio. I've stood next to the radio and verified that I am keying the repeater. Tonight, a station responded and I got no audio until the carrier dropped and a new signal was detected. I'm not sure if this is a D700 issue, a URI issue, or an app_rpt issue. I'm open to any suggestions. One other question, I defined an archivedir in rpt.conf, but I don't see audio files in the directory. I see the promised text file, but no audio. Did I miss a step? Thanks, Rachel AD9O
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.