I'm trying to figure out how setup up rpt.conf and voter.conf in an ACID server with a single non-radio node connected to Allstar, and nodes based on remotely located RTCM based repeaters that are non-voter. I've exhausted my online searches. I'm still missing something. Each RTCM (and repeater) will have its own IP address, as will the Allstar ACID server. It appears I do not need an RTCM located at the server for timing if the system is non-voting. The goal is to intertie them when needed, else they are unlinked Allstar nodes. (Setup sounds similar to our Guam friend's configuration). Everything I read is geared for a voting system. http://ohnosec.org/drupal/node/180 states there are three modes for the RTCM... I've not found how to do the non-voting mode. Any vectors to the information for non-voting, or examples of the setup with explanation is appreciated (anything short of a 2x4 up-side the head :-) I have the RTCM and ACID manuals. I'm missing something. Thanks much, Bob kk6ecm