yea.. the Stats server has been down now for a couple of days at least.. Loren Tedford (KC9ZHV) Email: lorentedford@gmail.com http://www.lorentedford.com http://www.kc9zhv.com http://forum.kc9zhv.com http://hub.kc9zhv.com http://www.newwavesucks.com http://forum.newwavesucks.com On Tue, Apr 26, 2016 at 11:24 PM, Steve Agee <n5zua@earthlink.net> wrote:
I believe if you will check back through your previous messages from earlier today or last night that it has been well documented on this list that the server will be up and down.
N5ZUA
On 4/26/2016 11:17 PM, KM4NRJ FLORIDA wrote:
Am I missing something or is the Allstar Stats server been offline lately. Cannot reach it to obtain node statuses and bubble maps.
73s
Chuck KM4NRJ On Apr 26, 2016 12:00 PM, < <app_rpt-users-request@ohnosec.org> app_rpt-users-request@ohnosec.org> wrote:
Send App_rpt-users mailing list submissions to app_rpt-users@ohnosec.org
To subscribe or unsubscribe via the World Wide Web, visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users or, via email, send a message with subject or body 'help' to app_rpt-users-request@ohnosec.org
You can reach the person managing the list at app_rpt-users-owner@ohnosec.org
When replying, please edit your Subject line so it is more specific than "Re: Contents of App_rpt-users digest..."
Today's Topics:
1. Re: Play two audio files back to back (David McGough) 2. Re: Play two audio files back to back (Steve Mahler)
----------------------------------------------------------------------
Message: 1 Date: Tue, 26 Apr 2016 07:51:32 -0400 (EDT) From: David McGough <kb4fxc@inttek.net> To: "app_rpt-users@ohnosec.org" <app_rpt-users@ohnosec.org> Subject: Re: [App_rpt-users] Play two audio files back to back Message-ID: <Pine.LNX.4.44.1604260747210.7079-100000@goliath.inttek.net> Content-Type: TEXT/PLAIN; charset=ISO-8859-1
I think the playback command only takes a single audio filename.
Try this approach:
cat /var/lib/asterisk/sounds/tide.gsm > /tmp/temp.gsm cat /var/lib/asterisk/sounds/times.gsm >> /tmp/temp.gsm cat /var/lib/asterisk/sounds/will-expire.gsm >> /tmp/temp.gsm cat /var/lib/asterisk/sounds/at-any-time.gsm >> /tmp/temp.gsm
asterisk -rx "rpt playback $node /tmp/temp"
rm -f /tmp/temp.gsm
Note that once these audio segments are cat'ed together, a final call to sox can be used to change levels, formats, etc., if needed.
73, David KB4FXC
On Tue, 26 Apr 2016, kk6ecm wrote:
Hmmm ... appears to be a mix of two syntaxes, and you may not achieve your goal...
Xxxxxxx*CLI> help rpt playback Usage: rpt playback <nodename> <sound_file_base_name> Send an Audio File to a node, send to all other connected nodes (global)
(seems there used to be a <delay> as a third variable)
and
playback, file&file1 on the current node, where the concatenated files are joined with the &, no spaces.
I'm wondering... set delay to 0... not sure if there is a default, or even if it is still a feature.
e.g.
asterisk -rx "rpt playback $node channel 0"
asterisk -rx "rpt playback $node digits/$chan 0"
Thanks, Bob kk6ecm 73
Sent from iPad
On Apr 25, 2016, at 9:26 PM, Skyler F < <electricity440@gmail.com> electricity440@gmail.com> wrote:
Small Problem:
rpt playback 42622 channel&channel
ast_streamfile: Unable to open channel&channel
73
Skyler
On Mon, Apr 25, 2016 at 10:23 PM, kk6ecm < <kk6ecm@gmail.com> kk6ecm@gmail.com> wrote: Leading and trailing spaces with the & are not tolerated. e.g filename&filename2 OK filename & filename2 Not OK
Thanks, Bob kk6ecm 73
Sent from iPad
On Apr 25, 2016, at 8:13 PM, Skyler F < <electricity440@gmail.com> electricity440@gmail.com> wrote:
I am currently writing scripts for my remote base, and am working on the channel switch acknowledgment.
Here is what I am currently doing:
asterisk -rx "rpt playback $node channel" asterisk -rx "rpt playback $node digits/$chan"
This works well for my 16 channel radio, but I am annoyed by the amount of space between the audio files.
I tried stuff like
asterisk -rx "rpt playback $node channel & digits/$chan"
but I just get a syntax error.
Does anybody know the solution to get the audio files to play back to back like they do when AllStar announces node connections etc?
73 Skyler KD??WHB\ _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Skyler Fennell amsatnet.info KD??WHB electricity440@gmail.com
------------------------------
Message: 2 Date: Tue, 26 Apr 2016 07:08:11 -0500 From: Steve Mahler <kizzy@lusfiber.net> To: app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Play two audio files back to back Message-ID: <571F5A2B.4050307@lusfiber.net> Content-Type: text/plain; charset=windows-1252; format=flowed
Or, if you are using WAV files ... catwav them (which uses sox) and play the result ...
/bin/rm -f $WXT/$TEMPMSG #Make filename available for output /usr/local/bin/catwav $WXT/$TAILMSG $WXA/${P1}${P2}${P3} $WXT/$TEMPMSG /bin/rm -f $WXT/$TAILMSG #Make filename available for output /usr/local/bin/catwav $WXT/$TEMPMSG $WXA/spc.wav $WXT/$TAILMSG
You would do the asterisk -rx " rpt localplay NODE cattedfile" here (I use it to build tailmessages with multiple announcements).
...STeve - KF5VH
On 4/26/2016 6:51 AM, David McGough wrote:
I think the playback command only takes a single audio filename.
Try this approach:
cat /var/lib/asterisk/sounds/tide.gsm > /tmp/temp.gsm cat /var/lib/asterisk/sounds/times.gsm >> /tmp/temp.gsm cat /var/lib/asterisk/sounds/will-expire.gsm >> /tmp/temp.gsm cat /var/lib/asterisk/sounds/at-any-time.gsm >> /tmp/temp.gsm
asterisk -rx "rpt playback $node /tmp/temp"
rm -f /tmp/temp.gsm
Note that once these audio segments are cat'ed together, a final call to sox can be used to change levels, formats, etc., if needed.
73, David KB4FXC
On Tue, 26 Apr 2016, kk6ecm wrote:
Hmmm ... appears to be a mix of two syntaxes, and you may not achieve your goal...
Xxxxxxx*CLI> help rpt playback Usage: rpt playback <nodename> <sound_file_base_name> Send an Audio File to a node, send to all other connected nodes (global)
(seems there used to be a <delay> as a third variable)
and
playback, file&file1 on the current node, where the concatenated files are joined with the &, no spaces.
I'm wondering... set delay to 0... not sure if there is a default, or even if it is still a feature.
e.g.
asterisk -rx "rpt playback $node channel 0"
asterisk -rx "rpt playback $node digits/$chan 0" Thanks, Bob kk6ecm 73
Sent from iPad
On Apr 25, 2016, at 9:26 PM, Skyler F < <electricity440@gmail.com> electricity440@gmail.com> wrote:
Small Problem:
rpt playback 42622 channel&channel
ast_streamfile: Unable to open channel&channel
73
Skyler
On Mon, Apr 25, 2016 at 10:23 PM, kk6ecm < <kk6ecm@gmail.com> kk6ecm@gmail.com> wrote: Leading and trailing spaces with the & are not tolerated. e.g filename&filename2 OK filename & filename2 Not OK
Thanks, Bob kk6ecm 73
Sent from iPad
On Apr 25, 2016, at 8:13 PM, Skyler F <electricity440@gmail.com> wrote:
I am currently writing scripts for my remote base, and am working on the channel switch acknowledgment.
Here is what I am currently doing:
asterisk -rx "rpt playback $node channel" asterisk -rx "rpt playback $node digits/$chan"
This works well for my 16 channel radio, but I am annoyed by the amount of space between the audio files.
I tried stuff like
asterisk -rx "rpt playback $node channel & digits/$chan"
but I just get a syntax error.
Does anybody know the solution to get the audio files to play back to back like they do when AllStar announces node connections etc?
73 Skyler KD??WHB\ _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
-- Skyler Fennell amsatnet.info KD??WHB electricity440@gmail.com
App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
------------------------------
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
End of App_rpt-users Digest, Vol 86, Issue 62 *********************************************
_______________________________________________ App_rpt-users mailing listApp_rpt-users@ohnosec.orghttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.