Well that's strange, I used root and debian and my node started over and wanted a root pw. Looks like I will re-enter and try again. George From: Steve Zingman [mailto:szingman@msgstor.com] Sent: Thursday, April 21, 2016 6:04 PM To: George Burton <k7wwa@saber.net>; app_rpt-users@ohnosec.org Subject: Re: [App_rpt-users] Newbe question login is root password is what you set for a password. On 04/21/2016 08:52 PM, George Burton wrote: I've loaded DIAL and I have filled out all of the setup info on the allstarlink.org page. I got past the initial root login where the PW is debian, now I am stuck at the "repeater login:" prompt. I do not have a clue what it is asking for nor do I remember entering a repeater login PW. Can anyone point me in the right direction? George K7wwa _______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org <mailto:App_rpt-users@ohnosec.org> http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem. -- "Anything is possible if you don't know what you are talking about." 1st Law of Logic