Ok, I found that and edited. Wrote it out, rebooted, and it doesn't seem to take affect, I went back in and my changes are there, both that and the new port, but its still listening on port 22. Is there somewhere I have to change which SSH config to load? Thanks again Tom On Thursday, August 16, 2018, 8:39:04 PM CDT, Mike <mm@midnighteng.com> wrote: Well, sorry, that's my poor memory getting the best of me again... confusing it with something else ! PermitRootLogin yes That should do it, but it may be commented out and say something other than yes/no by default. ...mike/kb8jnm On 8/16/2018 9:24 PM, TGundo 2003 wrote:
Hi Mike- I went in, changed my port. However, I don't see Enable web access anywhere. Could it be called something else? ThanksTom On Thursday, August 16, 2018, 4:19:30 PM CDT, Mike <mm@midnighteng.com> wrote: Ssh Edit etc/ssh/sshd_config Enable web access = yes
Save Restart ssh
You should change the port number while u r at it
Sorry t b brief Mobile
Mike / Sent While Mobile
On Aug 16, 2018, at 5:09 PM, TGundo 2003 <tgundo2003@yahoo.com> wrote:
Hi all-
I'm in the last lap of getting my first node online, still have a lot of learning to do. My setup consists of an S-Com 7330 that has repeaters on the first two ports and the Asterisk Pi on the third port for linking to a neighboring system.
A few items I need some direction on:
1. SSH access. I can putty into the Pi and get to the login and password screen, but it rejects my username and password that I use to log into the machine on the local interface. Do I need to setup a different user account for SSH access? anyone with a good web link on how to accomplish this?
2. CTCSS Invert. I am using USBRADIO for the driver. On the interface from the Repeater Builder USB-RIM Lite 7330 module it is lighting up my CTCSS light with no activity like its inverted. I can jumper the 7330 internally to invert it and make it go out, but not thru the driver. I changed CTCSS to USBINVERT but it didn't solve it. COS is working properly. What else should I be checking? Maybe a cabling issue? I used an off the shelf DB9 cable to connect the RIM to the 7330.
3. Are there any ports I need to open up on my router? I've looked far and wide and cannot seem to find this info. When the machine is fired up I see it is listed online on the website.
Thank you all for the help! Tom W9SRV
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
_______________________________________________ App_rpt-users mailing list App_rpt-users@lists.allstarlink.org http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users To unsubscribe from this list please visit http://lists.allstarlink.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.