Correct me if I'm wrong, Isn't the question about using the AC97 on board sound device in asterisk? For COS and PTT, yes the LPT port can be used. Steve On 2/9/2016 12:34 PM, Kenneth Grimard wrote:
I have done this using an old irlp interface take a look at this link.
the newest dial allstar release has parallel support in it.
look at the link for converting an old irlp node to all star it has info about the using the printer port for what you need.
ken n1dot
On 2/9/2016 7:22 AM, Josh W4ZZK wrote:
Again, forgive me. New to this... I have ordered a couple of CM-108 USB FOBs for the AllStar Project. I am curious... with the ability to do some script editing to use a PC's LPT Printer Port as a "GPIO" for COR, PTT, etc., could the Integrated Sound Card on the Mobo (which is mostly AC97 Chips) be used for Audio In and Out of the Computer? Running DIAL.
Thanks Josh W4ZZK
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visithttp://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.
This email has been sent from a virus-free computer protected by Avast. www.avast.com <https://www.avast.com/sig-email>
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.