8 Feb
2016
8 Feb
'16
6:07 p.m.
hardware: raspberry pi 2b with uri problem: raspberry pi 2b not seeing **** rx un-key if ptt released too quickly after final dtmf digit. I can repeat the issue by connecting to a node then: push ptt,*,7,1,release ptt. if i pause before releasing ptt then all is fine. if i release ptt immediately or same time as last dtmf digit then **** rx un-key is missed. i verified COD and did see the signal go from hi to low to the uri and didnt see the **** rx un-key in app rpt debug level 7. any suggestions? thanks, Gregory, KK6DOI