No, you can leave it as is. That way *92 is your disable command. 950 and 951 were just example. -- Tim :wq On Sep 27, 2013, at 7:45 AM, Robert Newberry <N1XBM@amsat.org> wrote:
OK, I see in the copy of rpt.conf.sample right now
;92=cop,3 ;system disable
So in theory I would want to change 92 to something I would prefer like your using 950 and 951.
I think I have that right!
Thanks
On Fri, Sep 27, 2013 at 10:32 AM, Tim Sawyer <tim.sawyer@me.com> wrote: System disable turns off the transmitter.
To use cop 3 you would add it your [functions] section in /etc/asterisk/rpt.conf for example:
950 = cop,3 ; Disable system 951 = cop,2 ; Enable system
Now *950 will turn off the system and *951 will turn it on. -- Tim :wq
On Sep 27, 2013, at 6:42 AM, Robert Newberry <N1XBM@amsat.org> wrote:
Well I'm making headway here. Now I'm confused again. I was looking at a way to have the URI stop asserting the PTT line after hearing a certain DTMF.
I see cop, 3 ;system disable.
Does this mean DTMF 3 will disable the system? I noticed on ohnosec the rpt.conf.sample it says change these to something other than listed below.
Also what exactly happens on a system disable?
Thank you
Apparare Scientior Paratus Communicare -N1XBM
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users