You're using pin 11? Any AC seen on pin 11, should be 350 mV rms for 60% deviation (3k on wideband FM). Is there Rx PL on the radio? In the CPS, under the radio configuration menu, accessory configuration tab there's Rx Audio type. This can be filtered or flat. Also check the basic tab on that page, watch the hook switch defeats PL checkbox if using PL. Lastly in the conventional personality channel settings, advanced tab, there's a pre/de emphasis setting that needs to match. Your deemph settings in software should compliment whats in the radio. Cheers, Jesse On Mon, May 11, 2015 at 7:11 PM, Apu <apu@spfld.com> wrote:
I'm trying to interface a Motorola CDM1250 to a Linux (ACID) server using a URIx and the pinout listed for the GM300 on the DMK website. I am successfully triggering the PTT and transmitting audio, but I am not receiving any audio to a SIP softphone connected to the node.
I see similar posts about this problem in the list archives from years ago but none of those solutions seems to be making a difference for me. Any thoughts?
Thanks in advance,
-- Apu <apu@spfld.com>
_______________________________________________ App_rpt-users mailing list App_rpt-users@ohnosec.org http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users
To unsubscribe from this list please visit http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users and scroll down to the bottom of the page. Enter your email address and press the "Unsubscribe or edit options button" You do not need a password to unsubscribe, you can do it via email confirmation. If you have trouble unsubscribing, please send a message to the list detailing the problem.