In the how to recompile, reinstall, and restart, I do not see 'make clean'. So in the source root directory: make clean make make install astres.sh This should solve the target not found error message. 73 and Merry Christmas, Ron - KA7U Did you recompile, reinstall, and restart asterisk? From: app_rpt-users-bounces at ohnosec.org <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> [mailto:app_rpt-users-bounces at ohnosec.org <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>] On Behalf Of Jim W7RY Sent: Saturday, December 24, 2011 11:34 PM To: Ken; 'Jim Duuuude'; 'app_rpt mailing list' Subject: Re: [App_rpt-users] CTCSS Drop Out Time It seems to be here: /usr/src/astsrc/asterisk/channels/xpmr And the line is: #define TOC_NOTONE_TIME 900 // ms I changed it from 600 to 900. Did not change a thing... Did I change the right thing? From: Ken <mailto:ke2n at cs.com <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>> Sent: Saturday, December 24, 2011 6:01 PM To: 'Jim Duuuude' <mailto:telesistant at hotmail.com <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>> ; w7ry at centurytel.net <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> ; 'app_rpt mailing list' <mailto:app_rpt-users at ohnosec.org <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>> Subject: RE: [App_rpt-users] CTCSS Drop Out Time Notone AKA chicken burst gives you carrier with no tone at the end. But some radios are too slow in closing the CTCSS and still make noise. There was a posting on here a while back that pointed the time delay in: /usr/src/asterisk/asterisk/channels/xpmr/xpmr.h The default is 600 ms. Some radios might be slower than this. You could change (increase) it, then make / make install and restart asterisk. My Alinco DR-?35 series seem to want to give you a small squelch tail no matter what you do, however. 73 Ken Reading along this thread, I notice 'make clean' is not in the 'how to'. So try it like this: From: app_rpt-users-bounces at ohnosec.org <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> [mailto:app_rpt-users-bounces at ohnosec.org <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>] On Behalf Of Jim Duuuude Sent: Saturday, December 24, 2011 6:17 PM To: w7ry at centurytel.net <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users>; app_rpt mailing list Subject: Re: [App_rpt-users] CTCSS Drop Out Time try txtoctype = notone in usbradio.conf JIM WB6NIL _____ From: w7ry at centurytel.net <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> To: app_rpt-users at ohnosec.org <http://ohnosec.org/cgi-bin/mailman/listinfo/app_rpt-users> Date: Sat, 24 Dec 2011 13:55:51 -0800 Subject: [App_rpt-users] CTCSS Drop Out Time Anyone know if there is an adjustment of the time the transmitter stays keyed, and the PL tone drops out and where that setting is? With my rigs, I still here the squelch crash after the repeater drops out. I would like to cut the PL off a little sooner or delay the transmitter a little longer. BTW, I'm all up and running with the repeater function and the node! Thanks to all that helped me get past the learning curve! Thanks! Merry Christmas 73 Jim W7RY