[App_rpt-users] Quad Card User IO Question

I'm looking into the possibility of using the NO6B Remote Base Interface with my Quad Card. The NO6B RBI is designed to accept the Doug Hall generic data stream, control a Kenwood TMG-707 and is primarily used with LinkComm controllers. The RBI expects standard TTL logic levels (<0.8 V for 0, >2.0 V for 1). Would this interface be driven properly with UIOA & UIOB on the Quad Card? Is the Doug Hall generic protocol currently supported by app_rpt? Thanks for any help in identifying potential challenges and pitfalls. John / WB5NFC